ALPHA 100松香助焊剂 Non-Activated Rosin Flux (Type R) GENERAL DESCRIPTION ALPHA 100 Flux is a solution of pure water-white rosin in alcohol, meeting the requirements of Type R of MIL-F- 14256D, designated as "Flux, Soldering, Liquid (Rosin Base)." This flux contains no activator additives, making this the least corrosive type of rosin flux available. USES ALPHA 100 can be used on critical electronic assemblies where current leakage is extremely sensitive and where flux residue removal is not feasible. This flux is often used to test the solderability of bare boards and component leads, as an incoming QC tool. ALPHA 100 is suitable for use on the following metals, provided the surfaces are not heavily tarnished: Cadmium (Plate) Tin (Hot Dipped) Copper Tin Plate (Electrolytic) Gold Tin/Zinc (Plate) Silver Terne (Plate) Solder (Plate) ROSIN TYPE ALPHA 100 Rosin Flux contains P.C. Rosin - a quality grade of water-white rosin that meets the requirements of Class A of Type 1, Grade WW of Federal Specification LLL-R-626. Use of P.C. Rosin insures a flux of maximum clarity, light color, and consistent performance. RESIDUE PROPERTIES Flux resides are non-conductive and non-hygroscopic and are, therefore, considered to be non-corrosive. While it is recommend that flux residues be removed after soldering for critical assemblies, no corrosion or current leakage will occur if some residues remain. RESIDUE REMOVAL For effective removal flux residues, Alpha solvent cleaners 564, 565 or 1003 can be used; for aqueous cleaning systems, Alpha 2100 can be used. TECHNICAL SPECIFICATIONS Physical Properties Typical Values Appearance Amber Liquid Specific Gravity @ 25°C (77°F) 0.898 @ 0.005 Flash Point (TCC) 20°C (68°F) Percents Solids 40% Typical Water Extract Resistivity 300,000 ohm-cm Fungus Resistance Per MIL-E-5272
深圳市汉泰电子材料有限公司长期供阿尔法系列(锡线,锡条,锡膏,助焊膏,助焊剂)千住系列(锡线,锡条,锡膏,助焊剂)阿米特系列(锡线,锡条,锡膏)乐泰系列(锡线,锡条,锡膏,底部填充胶,工业胶)减摩系列(锡线,锡条,锡膏)KOKI有铅无铅无卤无铅锡膏,TAMURA有铅无铅锡膏,铟泰有铅无铅无卤无铅锡膏,富士红胶,韩国130红胶,德邦底部填充胶等,如有需要欢迎各位来电咨询洽谈更多产品信息请登录hantaismt