SAI3880D发电机保护测控装置 点击查看详情

2.3.2 medium strengthUnder normal test conditions, the device can withstand the frequency of 50Hz, voltage 2000V lasted 1 minutes of power frequency voltage withstand test without breakdown flashover and component damage. During the test, the other circuit is connected to the ground with the other circuit when the voltage is applied.
2.3.3 impulse voltageIn the normal test atmospheric conditions, device power input circuit, the AC input circuit, output contact circuit and loop between, can withstand the 50s of the standard lightning wave short-time impulse voltage test, open test voltage 5kV.
2.3.4 resistance to damp heat resistance
The device can withstand the damp heat test specified in the twenty-first chapter of the GB7261. The highest temperature test + 40 DEG C, maximum relative humidity of 95%, the test time for 48 hours, each cycle lasted 24 hours of cyclic damp heat test, at the end of the test within 2 hours before according to the requirement 2.3.1, measure the circuits between the conductive circuit foreign Lufei charged metal part and the shell, electrical contact between the insulation resistance is not less than 1.5m ohm, medium compressive strength of not less than 75% of the 2.3.2 provisions of the dielectric strength test voltage amplitude.

Two technical parameter
2.1 Rated parameters
2.1.1Rated DC voltage： 220V or 110V (order indicated)
2.1.2 Rated AC data：
a) Phase voltage V

It is proposed that the turning point in the component current Ir0 is set to 1 times the rated current of the high voltage side to ensure that the turn to turn short circuit in the braking current is less than the rated current Ie Ir, there is no braking effect.
Differential current threshold criterion should not be too small, it is recommended to take Icd = (0.3 ~ 0.5) Ie.
The setting of the ratio braking coefficient can be carried out according to the following formula:
Kcd = Kk (Ktx / Fwc + Fph)
Among them, Kk is the reliable coefficient, take 1.3 ~ 1.5
Ktx for the same type coefficient, take 1
Fwc for the current transformer to allow the error, take 0.1
The Fph for the current caused by current transformer unbalanced relative error is 0.05.
Ratio braking coefficient Kcd recommended range of 0.3 to 0.7.Id ＝∣

-/gjigcb/-

 深圳国电南瑞是由原深圳南瑞电气及自动化研究院改制成立的一家从事电力系统保护和控制领域的技术研究、产品开发、生产销售和工程服务的大型电力自动化企业。 公司主要从事：110KV及以下变电站综合自动化系统、发电厂综合自动化系统、水电站综合自动化系统、调度综合自动化系统、工业控制自动化系统、高压谐波治理系统、微机五防系统、电力自动化智能仪表、微机消谐系统、智能开关电源直流系统、消谐消弧及过压保护装置等研究、生产、销售和服务。公司的不断开发研制适合不同用户要求的各种系列、各种规格电气自动化产品的追求、力争做国内同行业性价比产品。 国电南瑞把“以人为本，以德为先”作为事业发展基石，强调员工和企业利益一致，公司汇聚了一批电力系统及自动化、计算机应用、自动控制和通信技术，谐波治理等各类的科技精英。高学历、高素质、化的人才队伍使科技成果迅速转化成现实的生产力。力求打造国内自动化*。 公司始终坚持“质量”的方针，质量控制贯穿于从研发到生产过程的每一个环节，确保生产全过程处于受控状态。严格的产品检测制度，完善的测试手段，良好的产品售前、中、后服务。公司严格按照ISO9001的质量技术认证要求，先后荣获：中国电力自动化企业、质量信誉、服务AAA企业、中国着名、质量服务双保障示范单位等。 服务中国电力，打造世界，国电南瑞凭借自身实力已服务在全国的各类行业，部分有：陕西送变电工程、珠海湛江35KV变电站、鞍钢钢铁、上海宝钢、河南王杭庄煤矿、山西同煤潞安煤矿、山西沁新选煤、神华煤矿、辽阳水泥、洛钼集团、江西双张化工、贵州水城、河南义马矿、西电东送、京福高速、遵义供电局、南方电网、三峡工程等大型重点工程项目。 国电南瑞坚持“永远保持战略成员之一”的公司理念，坚持科技创新、不断突破自我！把握产业和行业发展趋势，孜孜以求地完善产品品质，坚持改革创新，力求持续改进。公司成立多年来，依靠人才优势、技术创新和良好的管理体制，研发、销售、工程服务得到全面发展。致力于高科技产业的发展，不断追求，为中国电力的发展做出更多的贡献，是国电南瑞永恒的追求。