供应瑞典DINITROL 4010 防锈润滑剂

DINITROL 4010由瑞典的DINOL AB公司所开发的*防腐蚀产品，用于集装箱在恶劣环境下使用的设备，并为他们提供长期而有效的防腐蚀和防锈蚀保护。DINOL AB公司从1947年就开始研发和生产用于汽车、集装箱工业和*行器的防腐蚀性蜡制产品。 特性：DINITROL 4010是一种具有特殊触变作用的蜡制防腐蚀产品，它可以为在恶劣环境中使用的部件和设备提供有效而长期的防腐蚀和**损保护。当溶剂挥发以后，本产品就会在金属的表面形成一层黑色的、坚韧而有弹性的、具有*防腐蚀功能的蜡状保护层。另外，这种涂层还具有耐热性，以及在常规修补中可以保持涂层附着力的功能。    Product:           DINITROL 4010     Characteristics:            DINITROL 4010 has the following properties:                                            - eaves a hard, transparent film                                            - is resistant to both alkali and acids                                            - is heat resistant up to a temperature of more than 200oC                                            - gives a shiny and clean film which facilitates a visual inspection of metal surfaces, reading of labels and numbers, etc.                                            - has good adhesion and flexibility on rubber and plastic parts at both low and high temperatures                                            - has a very short drying time and is designed to be sprayed for on-line protection     Range of use:                DINITROL 4010 is specially developed to be used on surfaces which are exposed to both high and low temperatures. Appropriate parts to be treated with DINITROL 4010 are engine compartments, engines, and other details that have to withstand high temperatures.                                          Do not spray on the exhaust system, manifold or belts, such as fan-or generator belt. Protect grille, radiator or Turbo unit. Ensure good ventilation of the engine bay during drying, for at least one hour.     Application:                    DINITROL 4010 should be applied as follows:                                            - on a clean surface                                            - with high or low pressure equipment                                            - at a temperature of 15-30oC                                            - airless or airmix                                           - product hardness, flexibility and adhesion are increased at higher temperature    TEST                                                        VALUE                                  METHOD Colour                                                       Clear lacquer Type of film                                               Hard, waxy Density at 23°C                                       890 kg/m3                              DAM 4:1 Viscosity at 23°C, DIN4                          26 s                                        DAM 5:1 Solids content                                          47 % by weight                     DAM 2:4 Flash point                                               28°C                                      DAM 7:4 Aromatic content in solvent                    <5% Rec. film thickness                                  40 µm Drying time                                               1h Low temperature adhesion                    -30oC                                     SAE J400 Effect on car paint                                   None                                      SS 186011 Heat resistance                                       >200oC                                  SS 186035 Salt spray test (24 h, 80oC)                                             240 h at 40m                         DAM 39:1 Removability                                            Not removable after drying Consumption/m²                                      103 ml   Health and Safety / Storage   DINITROL 4010 classified as flammable liquid according to 91/155 EC. No EEC symbol is required.   Store in closed packaging in a dry and ventilated area.  导购**
产品规格 DINITROL 4010 执行标准 91/155 EC. No EEC 主要用途 防腐蚀、防锈蚀、**耐热 类别 蜡膜防锈油