供应频谱分析仪FSEK30

频谱分析仪FSEK30  Rohde FSEK30 Measurements/Features  ★ RMS Detection★ Pretrigger★ Eight marker★ Color TFT Display★ Dig/Ana Mobile Radio★ Spread spectrum ch★ High DynamicRange★ Quasi-analog display★ Modular design★ CAL inerval to 2 yrs★ Built-in self test FSEK30 Performance Characteristics Form Factor Mainframe Input Impedance 50 Ohm  Minimum Frequency 20 Hz Maximum Frequency 40 GHz  Frequency Accuracy 0. %  Zero Span Yes  Minimum Sweep Time 1 us  Maximum Sweep Time 2500 s Minimum Resolution Bandwidth 1 Hz  Maximum Resolution Bandwidth  10 MHz  Resolution Bandwidth Steps  1/2/3/5  Minimum Video Bandwidth 1 Hz  Maximum Video Bandwidth  10 MHz  Video Bandwidth Steps 1/2/3/5 Minimum Single-Side-Band Noise -129 dBc/Hz Maximum Single-Side-Band Noise -81 dBc/Hz Maximum Safe AC Input 0.1 dBm Maximum DC Input 0 V  Minimum Displayed Average Noise -116 dBm Maximum Displayed Average Noise -74 dBm Maximum Dynamic Range 160 dB  Trigger Source External,Internal  Trigger Modes Freerun,TTL  Demodulation AM,FM Connector type (main **) Type-N(f)  Probe Power Yes  External Frequency Reference 10 MHz  Noise Source Driver No      FSEK30 Programmability/Connectivity User Interface Proprietary  Ports to Peripheral Devices GPIB,RS232  Data Storage Type FDD,HDD FSEK30 Compliance CE Compliance Not on file  UL Compliance Compliant  FSEK30 Power Requirements Input Power Universal (Auto Sense and Switch) FSEK30 Physical Dimensions ·Width: (N/A) ·Height: 236 mm(9.29 in) ·Length: 460 mm(18.11 in) ·Weight: 25.8 kg(56.87 lb) FSEK30 Standard Accessories ·Adapter 3.5mm /Adapter 3.5mm-Female and N Male /Qty:1 ·Operating Manua /Operating Manual /Qty:1 FSEK30 Options· Option 02 = 7GHz Frequency Extension · Option 07 = Vector Signal Analyzer · Option 15 = Controller with mouse and keyboard · Option 16 = Ethernet Interface (15 contact AUI connector) · Option 17 = Second ICE/IEEE-bus interface · Option 49 = Ethernet Interface (BNC) · Option B2 = 7GHz Frequency Extension · Option B7 = Vector Signal Analyzer · Option B8 = Tracking Generator 3.5GHz · Option B9 = Tracking Generator 3.5GHz with I/Q modulator · Option B10 = FSE-B10 Tracking Generator 7GHz · Option B11 = FSE-B11 Tracking Generator 7GHz with I/Q modulator · Option B12 = Switchable attenuator for tracking generator · Option B13 = 1 dB Step Attenuator · Option B15 = Controller with mouse and keyboard · Option B16 = Ethernet Interface (15 contact AUI connector) · Option B17 = Second ICE/IEEE-bus interface · Option B18 = Removable Hard Drive · Option B19 = Second Hard Drive (firmware included) · Option B21 = External Mixer · Option B22 = Increased Level Accuracy up to 2GHz · Option B23 = Broadband Output 741.1MHz · Option B1604 = Ethernet Interface (RJ-45 Connector

深圳市金仪通电子有限公司是专门从事电子测试仪器,仪表,销售,维修,计量和技术咨询及回收的**公司.我们拥有技术优良的维修工程师,有良好的维修条件和强有力的维修**,对外承接各类电子仪器,仪表的维修服务．