FSIQ7专业R&S罗德与施瓦茨频谱分析仪售后服务

FSQ26 20Hz至26.5GHz。


FSQ不仅继承了FSU的出色的频谱分析仪特性和功能，而且其解调和分析带宽可高达120MHz，还提供了基站频谱杂散**和多载波测量所必需的高动态范围。因此，FSQ是进行下列产品开发和生产的理想工具：WLAN、WiMAX、WCDMA、HSPA/HSPA+、GSM/EDGE/GPRS、CDMA2000/1x EV-DO、TD-SCDMA、LTE TDD/LTE FDD、Bluetooth等。


为了解决日益增加的数据吞吐量问题，未来移动无线和相关领域对带宽的要求必然越来越高。即使今天，GSM或3GPP基站的多载波信号在功率输出阶段常常需要进行放大，尽管这样一方面可以降低技术要求和成本，但同时也增加了传输带宽。随着分析带宽要求的提高，现有频谱分析仪产品已经难于满足分析要求，市场需要具有较高分析带宽的产品，而同时满足动态范围的苛刻要求。
R&S?FSQ不仅继承了R&S?FSU的出色的频谱分析仪特性和功能，而且其解调和分析带宽可高达120MHz。因此，R&S?FSQ是进行下列产品开发和生产的理想工具：
?WLAN
?3GPP和 GSM-MCPA
?WiMAX


除此之外，当与下列应用选件一起工作时，R&S? FSQ26还能支持2G、2.5G、3G以及4G移动无线系统的测量应用：


GSM/EDGE Application Firmware


R&S?FS-K5


AM/FM/PM Measurement Demodulator
for R&S?FSQ/FSU/FSP/FSUP Analyzers and the R&S?ESCI/ESPI Test Receivers


R&S?FS-K7


Bluetooth? Application Firmware


R&S?FS-K8


Power Sensor Measurements


R&S?FS-K9


GSM/EDGE/EDGE Evolution Measurements


R&S?FS-K10


VOR/ILS Measurement Demodulator
for R&S?FSMR/R&S?FSU/R&S?FSQ - Analysis for VOR and ILS **s


R&S?FS-K15


Application Firmware for Noise Figure and Gain Measurements for R&S?FSP, R&S?FSU and R&S?FSQ (preamplifier recommended, e.g. R&S?FSU-B25)
Outperforming any conventional noise measurement system


R&S?FS-K30


Application Firmware for phase noise measurements


R&S?FS-K40


Firmware General Purpose Vector Signal Analyzer
Universal demodulation, analysis and documentation of digital radio **s
This option is available for instruments for:
R&S?FSUP8: as of serial number 100024
R&S?FSUP26: as of serial number 100068
R&S?FSUP50: as of serial number 100013


R&S?FSQ-K70


3GPP BTS/Node B FDD Application Firmware
3GPP transmitter measurements with R&S?FSQ ** analyzers and R&S?FSU, R&S?FSG, R&S?FSUP, R&S?FSMR, R&S?FMU and R&S?FSP spectrum analyzers


R&S?FS-K72


3GPP UE FDD Application Firmware (including HSUPA)
3GPP transmitter measurements with R&S?FSQ ** analyzers and R&S?FSU, R&S?FSG, R&S?FSUP, R&S?FSMR, R&S?FMU and R&S?FSP spectrum analyzers


R&S?FS-K73


3GPP HSPA+ UE Application Firmware
3GPP transmitter measurements with R&S?FSQ ** analyzers and R&S?FSU, R&S?FSG and R&S?FSP spectrum analyzers.
Requires R&S?FS-K73


R&S?FS-K73+


3GPP HSDPA Base Transceiver Station (BTS) Application Firmware
3GPP transmitter measurements with R&S?FSQ ** analyzers and R&S?FSU, R&S?FSG, R&S?FSUP, R&S?FSMR, R&S?FMU and R&S?FSP spectrum analyzers.
Requires R&S?FS-K72


R&S?FS-K74


3GPP HSPA+ BTS Application Firmware
3GPP transmitter measurements with R&S?FSQ ** analyzers and R&S?FSU, R&S?FSG, R&S?FSUP, R&S?FSMR, R&S?FMU and R&S?FSP spectrum analyzers.
Requires R&S?FS-K74


R&S?FS-K74+


3GPP TD-SCDMA BTS Application Firmware
Base station and mobile station tests on TD-SCDMA with the R&S?FSQ, R&S?FSU and R&S?FSP


R&S?FS-K76


3GPP TD-SCDMA Mobile Station (MS) Application Firmware
Base station and mobile station tests on TD-SCDMA with the R&S?FSQ, R&S?FSU and R&S?FSP


R&S?FS-K77


CDMA2000? / IS-95 (cdmaOne) / 1xEV-DV BTS Test Application Firmware


R&S?FS-K82


CDMA2000? /1xEV-DV MS Application Firmware


R&S?FS-K83


CDMA2000? 1xEV-DO Base Station Test Application Firmware (including Rev A)
Transmitter measurement on 3GPP2 **s with Signal Analyzer R&S?FSQ and Spectrum Analyzers R&S?FSU and R&S?FSP


R&S?FS-K84


CDMA2000? 1xEV-DO Mobile Station Test Application Firmware
Transmitter measurement on 3GPP2 **s with Signal Analyzer R&S?FSQ and Spectrum Analyzers R&S?FSU and R&S?FSP


R&S?FS-K85


WLAN 802.11a/b/g/j Application Firmware


R&S?FSQ-K90


WLAN Application Firmware
WLAN IEEE 802.11 a/b/g/j TX Application Firmware


R&S?FSQ-K91


WLAN Application Firmware
R&S?FSQ-K91 Upgrade to IEEE 802.11n


R&S?FSQ-K91n


Application Firmware
TX measurements on OFDM **s in line with IEEE 802.16-2004


R&S?FSQ-K92


Application Firmware
R&S?FSQ-K92 to R&S?FSQ-K93 Upgrade
(R&S?FSQ-K92 required)


R&S?FSQ-K92U


Application Firmware
TX measurements on OFDMA **s in line with IEEE 802.16-2004, IEEE 802.16e-2005


R&S?FSQ-K93


Application Firmware
TX measurements on WiMAXTM MIMO **s in line with IEEE 802.16e-2005


R&S?FSQ-K94


Analysis of EUTRA/LTE FDD downlink **s
3GPP LTE transmitter measurements on base stations and modules with the R&S?FSG and R&S?FSQ Signal Analyzer


R&S?FSQ-K100


Analysis of EUTRA/LTE FDD uplink **s
3GPP LTE transmitter measurements on user equipment and modules with the R&S?FSG and R&S?FSQ Signal Analyzer


R&S?FSQ-K101


Analysis of EUTRA/LTE downlink MIMO **s
3GPP LTE transmitter measurements on base stations and modules with the R&S?FSG and R&S?FSQ Signal Analyzer
(requires R&S?FSQ-K100)


R&S?FSQ-K102


Analysis of EUTRA/LTE TDD downlink **s
Transmitter measurements on LTE **s


R&S?FSQ-K104


Analysis of EUTRA/LTE TDD uplink **s
Transmitter measurements on LTE **s


R&S?FSQ-K105


TETRA Release 2 Analysis
TETRA/TEDS measurements for the R&S?FSU / R&S?FSQ


R&S?FS-K110

产品型号：FSU8
产品品牌：R&S 罗德与施瓦茨
产品名称：频谱分析仪


FSU8|R&S|8G|频谱分析仪|罗德与施瓦茨|20Hz至8GHz
FSU8详细说明：
R&S 罗德与施瓦茨FSU 系列频谱分析仪
FSU3 20 Hz to3.6 GHz
FSU8 20 Hz to 8GHz
FSU26 20 Hz to26.5 GHz
FSU46 20 Hz to46 GHz
FSU50 20 Hz to50 GHz
FSU67 20 Hz to67GHz

R&S FSU8系列频谱仪是动态范围、相位噪声、电平精度和分辨率带宽等频谱仪指标的**者，所有这些指标也是用户设计、测量和生产下一代无线通讯元件的重要**。

FSU8频率范围：从20Hz开始，分别到3.6 GHz, 8 GHz, 26.5 GHz, 46 GHz和50 GHz
FSU8显示平均本地噪声：-158 dBm(归一化到1 Hz)
FSU8相位噪声：-123 dBc (1 Hz) 在10 kHz偏移处
FSU8三阶互调截断点（TOI）：典型值+25 dBm
FSU8分辨率带宽：1 Hz 到50 MHz
FSU8较高的测量速度支持时域模式的快速邻信道功率（ACP）测量每秒能进行70次测量（包括通过GPIB总线传输数据的时间）
无可匹敌的测量功能标准配置即可提供TOI, MC ACP(R), OBW,CCDF, APD等测量功能选件可以支持：- GSM / EDGE -Bluetooth? - WCDMA / HSDPA / TD-SCDMA - CDMA2000? / 1xEV-DV /1xEV-DO

R&S FSU26 频谱分析仪


R&SFSU系列频谱仪是动态范围、相位噪声、电平精度和分辨率带宽等频谱仪指标的**者，所有这些指标也是用户设计、测量和生产下一代无线通讯元件的重要**。


平均本地噪声：-158 dBm(归一化到1 Hz) 相位噪声：-123 dBc (1 Hz) 在10 kHz偏移处三阶互调截断点（TOI）：典型值+25 dBm 分辨率带宽：1 Hz 到50MHz


较高的测量速度支持时域模式的快速邻信道功率（ACP）测量每秒能进行70次测量（包括通过GPIB总线传输数据的时间）,无可匹敌的测量功能标准配置即可提供TOI, MC ACP(R), OBW,CCDF, APD等测量功能选件可以支持：-GSM / EDGE -Bluetooth? - WCDMA / HSDPA / TD-SCDMA - CDMA2000? / 1xEV-DV/1xEV-DO.优异的射频性能一直是罗德与施瓦茨频谱仪的主要特点。R&SFSU继续保持这个传统，提供了如下的射频性能：


FSU26频谱分析仪频率范围：


FSU26 20 Hz to26.5 GHz


FSU26频谱分析仪射频性能:


到3.6GHz的总电平不确定度为0.3dB


到-70dB时的线形度误差小于0.1dB


FSU26频谱分析仪电平精度：


显示平均本地噪声：-158 dBm(归一化到1 Hz)，无预放


单边带相位噪声typ. -123 dBc/Hz @ 10 kHz 偏移, 中心频率640 MHz


单边带相位噪声typ. -160 dBc/Hz @ 10 MHz 偏移, 中心频率640 MHz


三阶互调截断点（TOI）：典型值+25 dBm


1dB压缩点：+13dBm


WCDMA邻信道泄漏功率（ACLR）动态范围为77.5 dB，打开噪声修正之后可达84 dB


FSU26频谱分析仪IQ下变频器：


中频A/D转换的精度为14bit，采样率32MHz（中频频率为20.4MHz）


IQ存储器容量为2x512 k采样点


FSU26频谱分析仪速度：


频域扫描时间小为2.5ms


时域扫描时间小为1 ?s


每秒能进行70次测量（包括通过GPIB总线传输轨迹数据的时间）


远程控制模式可以支持列表扫描（listmode），进一步减少测量时间


射频性能：


DANL 测量的典型值为 -158 dBm （1Hz）（无预放）


单边带相位噪声典型值 - 133 dBc （1Hz） @ 10 kHz 偏离，载波640 MHz


相位噪声典型值 - 160 dBc/Hz @ 10 MHz 偏离，载波 640 MHz


三阶截止点典型值 25 dBm


1dB压缩点典型值 13 dBm


WCDMA ACLR 动态范围为 77.5 dB / 84 dB（采用噪声校正）

-/gjhied/-

北京聚圭源科技有限公司主要从事无线电、射频、微波、光通信、电源、功放、生命科学等类型的电子测试仪器，包括：是德（KEYSIGHT）、安捷伦(Agilent）、惠普（HP）、罗德（R&S）、泰克（Tektronix）、吉时利（KEITHLEY）、福禄克（FLUKE）、安立（Anritsu）、AR、艾法斯（Aeroflex）、阿美特克（Ametek）等进口品牌。服务内容包括：仪器销售（全新、二手），仪器维修，仪器租赁，仪器计量校准，仪器收购、换购等。公司秉承“诚信、专业、高效、贴心”的企业理念，不断提高优质的产品、快捷的服务，坚持与客户携手共赢，共同进步，开创美好的未来。