西门子V90电机1FL6092-1AC61-2LA1 西门子 购买指南

概述
SINAMICS V20 converters, frame sizes: FSAA, FSAB, FSAC, FSA, FSB, FSC, FSD and FSE
SINAMICS V20 – The cost-effective, reliable and easy-to-use converter for basic applications
Today, in an increasing number of applications in plant and machinery construction, individual automation and drive solutions are demanded that automate simple motion sequences with low associated requirements.
The compact SINAMICS V20, the basic performance converter, offers a simple and cost-effective drive solution for these types of applications. SINAMICS V20 sets itself apart with its quick commissioning times, ease of operation, robustness and cost-efficiency.
With eight frame sizes, it covers a power range extending from 0.12 kW to 30 kW (0.16 hp to 40 hp).
Minimizing costs
SINAMICS V20 keeps engineering and commissioning costs as well as those in operation as low as possible. To increase energy efficiency, the converter is equipped with a control technique to achieve optimum energy efficiency through automatic flux reduction. Not only this, it displays the actual energy consumption and has additional, integrated energy-saving functions. This allows energy consumption to be slashed drastically

功能
Feature
Comment
Connection and application macros
Sets groups of parameters to simplify commissioning
?Connection macros for connections
?Application macros for applications
Keep Running Mode
Single-parameter setting for a mode which keeps the motor going – enables
?Vdc_max controller
?Kinetic buffering
?Restart after fault
?Flying start.
?Disables alarms etc.
ECO mode
Economy mode – searches for most efficient rated point
Hibernation mode
Intelligent economy mode in idle state
PID controller
Integrated PID controller with auto-tuning function
Kinetic buffering (Vdc_min controller)
Retention of minimal DC voltage through regenerative energy for continued operation
Vdc_max controller
Automatic change of ramp down time/braking time
Imax controller
Automatic change of ramp up time to avoid overcurrent
Automatic restart
Automatic restart of drive once the power has been restored following a power failure. All faults are acknowledged automatically and the drive is switched on again
Flying restart
Allows the converter to be switched to a rotating motor
Energy consumption monitoring
Displays a simple estimate of energy or cost saved against use of a line-connected motor
50/60 Hz adaptation
Easy selection of operation with 50 Hz (Europe, Asia) / 60 Hz (USA)
V/f and V2/f
V/f: perfectly suitable for almost any application in which the speed of asynchronous (induction) motors is to be changed
V2/f: suited to loads with quadratic load curves, e.g. turbo machines such as pumps and fans
FCC
Maintains motor flux current for improved efficiency
Programmable V/f coordinates
Freely adjusts the V/f characteristics, e.g. torque behavior of the synchronous motor
JOG
Moves the motor to test the direction or moves the load to specific position. When the BOP switches to JOG mode, pressing the start button of the BOP will run the motor up to the JOG frequency.
Releasing the start button stops the motor
DC braking
Stops the motor which runs at constant speed and only comes to a standstill in longer time intervals, e.g. centrifuges, saws, grinding machines and conveyor belts
Mechanical holding brake control
The motor holding brake prevents the motor from undesirable turning when the converter is switched off. The converter has an internal logic to control an external motor holding brake
USS
Universal Serial Interface Protocol
Modbus RTU
Modbus RTU communication available via the RS485 link
Super torque mode
Big torque boost for starting high-inertia applications
Hammer start mode
A number of torque pulses at start-up to start difficult or "stuck" loads
Blockage clearing mode
Multiple-reverse function to clear blocked pumps
Simple parameter-based menu on internal or external BOPs
Easy selection for displaying values, editing parameters, converter setup
Simple text menu for setup
The parameter number will be shown as short text in the 7-segment LED display
Motor frequency display scaling
User settable display scaling for special applications i.e. rather than Hz, it shows application-specific values like "gallons per minute", "potatoes per hour", etc.
Customization of parameter defaults
Customers or OEMs can set their own special "permanent" defaults which can only be deleted in special mode
Converter status in case of a fault
Record the fault with running data
应用
Typical applications
Pumping, ventilating, compressing
Advantages
?Centrifugal pumps
?Radial/axial fans
?Compressors
?High availability through automatic restart and flying restart after power failures
?Broken belt detection by monitoring the load torque
?Pump protection against cavitation
?Hammer start and blockage clearing modes for clogged pumps
?PID controller for process values (e.g. temperature, pressure, level, flow)
?PID auto tuning to optimize controller parameters
?Hibernation mode stops the motor when demand is low
?Motor staging extends the flow range by adding two more fixed-speed drives (cascade)
?Frost and condensation protection prevents moisture in motors under extreme environmental conditions
?With optional SINAMICS V20 I/O Extension Module for 400 V converters: Multi-pump control 1), with which up to four pumps can be controlled with a frequency converter and applications that require additional digital inputs and digital outputs (e.g. in water supply systems for buildings)
Moving
Advantages
?Conveyor belts
?Roller conveyors
?Chain conveyors
?Moving walkways
?Bucket conveyors
?Soft, jerk-free acceleration reduces the stress on the gear units, bearings, drums and rollers
?Super torque start for conveyor belts with high breakaway torque
?Dynamic behavior by using braking resistor or DC braking
?Direct control of mechanical holding brake
?Broken belt detection by monitoring the load torque
?Precise stopping with Quick Stop (switch-off positioning) independently of the control cycle
Processing
Advantages
?Single drives in the processing industry such as mills, mixers, kneaders, crushers, agitators, centrifuges
?Single drives in commercial applications such as ovens, mixers, industrial washing machines
?Main drives in machines with mechanically coupled axes such as spinning machines, braiding machines for textiles, ropes and wires
?Frost and condensation protection prevents moisture in motors under extreme environmental conditions
?Higher productivity with uninterrupted production due to Keep Running Mode
?Exchange of regenerative energy via the DC link
?Super torque start for machines with a high breakaway torque

6SL3210-5BB11-2BV1
SINAMICS V20 200-240 V 1 相交流 - 10/+ 10 标称功率 0.12 kW 有 60 秒 150 % 过载 集成过滤器 C1 I/O 接口：4 DI，2 DO， 2 AI，1 AA 现场总线：USS/MODBUS RTU 安装有 BOP 防护等级 IP20/UL 开放 尺寸：尺寸AA 68x142x108（宽x
显示价格
组态
6SL3210-5BB11-2UV1
SINAMICS V20 200-240 V 1 相交流 - 10/+ 10 标称功率 0.12 kW 有 60 秒 150 % 过载 未过滤 I/O 接口：4 DI，2 DO， 2 AI，1 AA 现场总线：USS/MODBUS RTU 安装有 BOP 防护等级 IP20/UL 开放 尺寸：尺寸AA 68x142x108（宽x
显示价格
组态
6SL3210-5BB12-5BV1
SINAMICS V20 200-240 V 1 相交流 - 10/+ 10 标称功率 0.25 kW 有 60 秒 150 % 过载 集成过滤器 C1 I/O 接口：4 DI，2 DO， 2 AI，1 AA 现场总线：USS/MODBUS RTU 安装有 BOP 防护等级 IP20/UL 开放 尺寸：尺寸AA 68x142x108（宽x
显示价格
组态
6SL3210-5BB12-5UV1
SINAMICS V20 200-240 V 1 相交流 - 10/+ 10 标称功率 0.25 kW 有 60 秒 150 % 过载 未过滤 I/O 接口：4 DI，2 DO 2 AI，1 AA 现场总线：USS/MODBUS RTU 安装有 BOP 防护等级 IP20/UL 开放 尺寸：尺寸AA 68x142x108（宽x
显示价格
组态
6SL3210-5BB13-7BV1
SINAMICS V20 200-240 V 1 相交流 - 10/+ 10 标称功率 0.37 kW 有 60 秒 150 % 过载 集成过滤器 C1 I/O 接口：4 DI，2 DO， 2 AI，1 AA 现场总线：USS/MODBUS RTU 安装有 BOP 防护等级 IP20/UL 开放 尺寸：尺寸AA 68x142x108（宽x
显示价格
组态
6SL3210-5BB13-7UV1
SINAMICS V20 200-240 V 1 相交流 - 10/+ 10 标称功率 0.37 kW 有 60 秒 150 % 过载 未过滤 I/O 接口：4 DI，2 DO， 2 AI，1 AA 现场总线：USS/MODBUS RTU 安装有 BOP 防护等级 IP20/UL 开放 尺寸：尺寸AA 68x142x108（宽x
显示价格
组态
6SL3210-5BB15-5BV1
SINAMICS V20 200-240 V 1 相交流 - 10/+ 10 标称功率 0.55 kW 有 60 秒 150 % 过载 集成过滤器 C1 I/O 接口：4 DI，2 DO， 2 AI，1 AA 现场总线：USS/MODBUS RTU 安装有 BOP 防护等级 IP20/UL 开放 尺寸：尺寸AB 68x142x128（宽x
显示价格
组态
6SL3210-5BB15-5UV1
SINAMICS V20 200-240 V 1 相交流 - 10/+ 10 标称功率 0.55 kW 有 60 秒 150 % 过载 未过滤 I/O 接口：4 DI，2 DO， 2 AI，1 AA 现场总线：USS/MODBUS RTU 安装有 BOP 防护等级 IP20/UL 开放 尺寸：尺寸AB 68x142x128（宽x
显示价格
组态
6SL3210-5BB17-5BV1
SINAMICS V20 200-240 V 1 相交流 - 10/+ 10 标称功率 0.75 kW/1 PS 有 60 秒 150 % 过载 集成过滤器 C1 I/O 接口：4 DI，2 DO， 2 AI，1 AA 现场总线：USS/MODBUS RTU 安装有 BOP 防护等级 IP20/UL 开放 尺寸：尺寸AB 68x142x128（宽x
显示价格
组态
6SL3210-5BB17-5UV1
SINAMICS V20 200-240 V 1 相交流 - 10/+ 10 标称功率 0.75 kW/1 PS 有 60 秒 150 % 过载 未过滤 I/O 接口：4 DI，2 DO， 2 AI，1 AA 现场总线：USS/MODBUS RTU 安装有 BOP 防护等级 IP20/UL 开放 尺寸：尺寸AB 68x142x128（宽x
- Operating and ambient temperatures between -10 °C and +40 °C (max. +60 °C with derating)
?Wireless commissioning, operation and diagnostics via mobile device or laptop thanks to the optional web server module SINAMICS V20 Smart Access- Enables easy access to the converter, even when it is installed in difficult-to-access areas
- Simple operation thanks to intuitive user interface and commissioning wizard
- Flexible choice of terminal devices as the web server works with every HTML5-compatible web browser
?Expansion of the 400 V converters with two digital inputs and two digital outputs (relay outputs) thanks to optional SINAMICS V20 I/O Extension Module- Higher flexibility of the frequency converter without additional outlay for installation, hardware and software
- Additional functionalities such as multi-pump control, with which up to four pumps can be controlled with a frequency converter
Easy to save money
Energy reduction during operation and standby
?ECO mode for V/f, V2/f
The integrated ECO mode for V/f, V2/f control automatically adapts the magnetic flux in the motor to save energy. The energy consumption can be shown in kWh, CO2 or even in the local currency.- Energy saving during low dynamic load cycles
- Specifies the actual energy that has been saved
?Hibernation mode
Converter and motor are only activated when used by the plant or machine- Smart hibernation saves energy
- Motor service life is extended
- Reduced pump wear at low speed
- Less time needed to program PLC code for pump/fan applications (PLC)

Complete motion control solutions from Siemens – SINAMICS V20 and SIMATIC
Siemens offers comprehensive solutions from a single source for general motion control applications with a selection of different SINAMICS application examples:
?Ready-to-run application examples, including wiring diagrams, parameter descriptions
?Sample configurations for connecting SINAMICS with SIMATIC, including hardware, software and wiring examples, installation instructions for the supplied S7 project, drive parameterization, and HMI sample projects- Correctly configured project, ready for operation
- Optimal leveraging of TIA advantages
Easy to use
?Parameter settings can be easily transferred from one unit to another using the battery-operated parameter loader.- Less technical support required
- Short commissioning time
- The product is delivered to the customer already preset
?Integrated connection and application macros
To simplify I/O configuration and make the appropriate settings- Shorter commissioning time
- Integrated and optimized application setting
- Simple connection and application macros can be selected instead of configuring long, complicated parameter lists
- Errors caused by wrong parameter settings can be avoided
?Keep Running Mode allows uninterrupted operation
This function provides higher productivity in production by automatic adaptation in the case of unstable line supplies- Stable operation under difficult line supply conditions
- Higher productivity through prevention of interruptions to the production line
- Adaptation to application-relevant reactions through flexible definition in case of faults/alarms
?Wide voltage range, advanced cooling design and coated PCBs increase robustness of the drive in difficult environments- Operation possible when the line supply voltage fluctuates
- Reliable operation at line voltages:
200 V ... 240 V 1 AC (-15 %/+10 %) 1)
380 V ... 480 V 3 AC (-15 %/+10 %)

Accessories
1
SINAMICS V20 Smart Access
Wireless commissioning, operation, and diagnostics with mobile device or laptop using web server module
2
SINAMICS V20 BOP
?Same function as the integrated BOP (Basic Operator Panel)
?Can also be used for remote mounting
?Values and setpoints are changed by rotating the wheel
?For distributed mounting with IP54 and UL Type 1 enclosure rating
3
SINAMICS V20 BOP Interface
?Connection between converter and BOP
?RJ45 interface is compatible with standard network cable
4
Standard network cable
?Cable not included in delivery
?You can use any standard network cable with standard RJ45 connector
5
SINAMICS V20 Parameter Loader
?Up to 100 parameter sets with parameter settings can be written from the memory card to the converter, or saved from the converter to the memory card
?The converter does not have to be connected to the line supply
6
SINAMICS SD card
?Memory card, 512 MB
?Standard SD cards up to 32 GB are supported
7
SINAMICS V20 I/O Extension Module
?Expansion of the 400 V converters with two digital inputs and two digital outputs (relay outputs)
8
Line filter
Improved EMC characteristics
9
Line reactor
?Reduces the harmonic current
?Improves the power factor
?Recommended if input current (rms value) is higher than the rated current of the converter
10
SINAMICS V20 Braking Module
?Shortens the deceleration ramp time
?Suitable for 230 V 1 AC and 400 V 3 AC
?Adjustable duty cycle from 5 % to 100 %
?For frame sizes FSAA, FSAB, FSAC, FSA, FSB and FSC
?FSD and FSE already have an integrated braking unit
11
Braking resistor
?Dissipates regenerative energy as heat
?5 % duty cycle as default setting
12
Output reactor
For longer motor cable
?230 V 1 AC: 200 m (shielded and unshielded)
?400 V 3 AC:- for frame sizes FSA to FSD: 150 m (shielded and unshielded)
- for frame size FSE: 200/300 m (shielded/unshielded)
13
Shield connection kit
?Shield connection
?Strain relief
14
Standard fuse
Recommended fuse corresponding to the IEC/UL standard
15
Circuit breaker
Recommended circuit breaker corresponding to the IEC/UL standard
Integrated energy flow monitoring
?Energy consumption and savings are monitored without the need for power measurement equipment- Intuitive values of power consumption and savings without additional investments for measurement equipment
- Values can be shown as kWh, CO2 or as a currency
Cost-savings for low-overload applications with SINAMICS V20 converters, frame size FSE
SINAMICS V20 frame size FSE converters feature two different load cycles:
?Low overload (LO): 110 % × IL 2) for 60 s (cycle time: 300 s)
?High overload (HO): 150 % × IH 3) for 60 s (cycle time: 300 s)
With the low-overload cycle, the converter can reach a higher output current and power.
A smaller converter can be used. Optimally designed for variable applications:
?Low overload for applications with a low dynamic response (continuous duty)
?High overload for applications with a high dynamic response (cyclic duty)
?DC link coupling
Applications that use SINAMICS V20 drives with the same power rating can share a common DC bus to reuse the regenerative energy- Generate and save energy in applications that use coupled motors
- The converters can then optimally share the load mutually.
- Reduce the need for dynamic braking and external components
Integrated energy flow monitoring
?Energy consumption and savings are monitored without the need for power measurement equipment- Intuitive values of power consumption and savings without additional investments for measurement equipment
- Values can be shown as kWh, CO2 or as a currency

-/gbadicf/-

上海西熙工控自动化有限公司是一家专业从事西门子工业自动化产品和数控系统销售、技术服务及培训的工程服务公司。 销售代理西门子WINCC组态软件,西门子PLC编程软件,西门子PLC,S7-200CN/S7-200/S7-300/S7-400/S7-1200/(6ES7/6GK/6AV/6FC/6SN/6FX/6SE/6RA/6DD/7ML/7MH/7KM/7MF/3RV/3RH/3TF)西门子PROFIBUS-DP总线，RS485总线接头，CP网卡，变频器，触摸屏，低压电器，数控伺服备件。 “信誉**，客户至上”是公司成立之初所确立的宗旨，在公司**的严格要求和员工们不折不扣地贯彻执行下发展延续至今。“假一罚十”一直是我公司的主动承诺。 我公司致力于专业推广西门子高性能自动化系统和驱动产品，所经营产品范围包括：LOGO!通用模块；SIMATIC S7-200、S7-300、S7-400系列可编程控制器； SIMATIC HMI面板，工控机，编程器；工业PROFIBUS、以太网及无线通讯等相关产品；正版PCS7 软件、WINCC组态软件、STEP 7编程软件；SITOP工业开关电源；通用型、工程型变频器，直流调速装置等。随着技术的发展和产品的较替，高新产品的出现层出不穷，我公司也紧随西门子脚步争取为广大客户提供较新的自动化产品：SIMATIC S7-1200系列PLC；SIMATIC BASIC HMI面板；G120、G130、G150、S120等全新SINAMICS家族驱动产品；PCS7 V7.1和较新的STEP7 Basic平台软件等。公司各类产品齐全，货量充足，能够满足客户紧急大量现货需求，保证工期进度。 请相信上海西熙工控自动化有限公司是您忠诚的长久的合作伙伴，我们愿与广大客户携手向前，共同进步！