西门子V90电机1FL6062-1AC61-0LG1 西门子 购买指南

概述
SINAMICS V20 converters, frame sizes: FSAA, FSAB, FSAC, FSA, FSB, FSC, FSD and FSE
SINAMICS V20 – The cost-effective, reliable and easy-to-use converter for basic applications
Today, in an increasing number of applications in plant and machinery construction, individual automation and drive solutions are demanded that automate simple motion sequences with low associated requirements.
The compact SINAMICS V20, the basic performance converter, offers a simple and cost-effective drive solution for these types of applications. SINAMICS V20 sets itself apart with its quick commissioning times, ease of operation, robustness and cost-efficiency.
With eight frame sizes, it covers a power range extending from 0.12 kW to 30 kW (0.16 hp to 40 hp).
Minimizing costs
SINAMICS V20 keeps engineering and commissioning costs as well as those in operation as low as possible. To increase energy efficiency, the converter is equipped with a control technique to achieve optimum energy efficiency through automatic flux reduction. Not only this, it displays the actual energy consumption and has additional, integrated energy-saving functions. This allows energy consumption to be slashed drastically

- Operating and ambient temperatures between -10 °C and +40 °C (max. +60 °C with derating)
?Wireless commissioning, operation and diagnostics via mobile device or laptop thanks to the optional web server module SINAMICS V20 Smart Access- Enables easy access to the converter, even when it is installed in difficult-to-access areas
- Simple operation thanks to intuitive user interface and commissioning wizard
- Flexible choice of terminal devices as the web server works with every HTML5-compatible web browser
?Expansion of the 400 V converters with two digital inputs and two digital outputs (relay outputs) thanks to optional SINAMICS V20 I/O Extension Module- Higher flexibility of the frequency converter without additional outlay for installation, hardware and software
- Additional functionalities such as multi-pump control, with which up to four pumps can be controlled with a frequency converter
Easy to save money
Energy reduction during operation and standby
?ECO mode for V/f, V2/f
The integrated ECO mode for V/f, V2/f control automatically adapts the magnetic flux in the motor to save energy. The energy consumption can be shown in kWh, CO2 or even in the local currency.- Energy saving during low dynamic load cycles
- Specifies the actual energy that has been saved
?Hibernation mode
Converter and motor are only activated when used by the plant or machine- Smart hibernation saves energy
- Motor service life is extended
- Reduced pump wear at low speed
- Less time needed to program PLC code for pump/fan applications (PLC)

优势
Easy to install
?Push-through and wall mounting- Side-by-side mounting possible for both
- Compact installation allows smaller cabinets to be used
- Push-through mounting allows the cabinet to be cooled more easily
- Frame sizes FSAA, FSAB and FSAC (230 V 1 AC) are significantly smaller compared to the previous frame sizes FSA and FSB within the same power range
?Plug & Play- Can be run "out-of-the-box" without other options
- Basic operator actions at a built-in BOP (Basic Operator Panel)
?Connection of SINAMICS V20 with USS or Modbus RTU via terminals- Easy integration into existing systems
- Easier commissioning through standard libraries and connection macros
- Full flexibility of Modbus RTU settings widens communication with controller
- Simple connection to a control system (e.g. SIMATIC S7 PLC via Modbus RTU/USS)
?Integrated Braking Module- Converters ≥ 7.5 kW (frame sizes FSD and FSE) have an integrated Braking Module. In this case, the braking resistor can be directly connected. The dynamic energy is dissipated as heat in a braking resistor with an adjustable duty cycle of between 5 % and 100 %.
- Possible to use dynamic braking to increase braking performance
?EMC category C1- The devices are optionally available with an integrated RFI suppression filter, enabling compliance with the radio interference limit values laid out in IEC 61800?3 category C1 when installed in the control cabinet in an EMC-compliant manner. Frame sizes FSAA, FSAB and FSAC therefore satisfy the radio interference requirements for industrial applications as well as for use in residential and business environments, including commercial applications such as refrigerated counters, fitness equipment, ventilation systems, industrial washing machines, etc
?DC link coupling
Applications that use SINAMICS V20 drives with the same power rating can share a common DC bus to reuse the regenerative energy- Generate and save energy in applications that use coupled motors
- The converters can then optimally share the load mutually.
- Reduce the need for dynamic braking and external components
Integrated energy flow monitoring
?Energy consumption and savings are monitored without the need for power measurement equipment- Intuitive values of power consumption and savings without additional investments for measurement equipment
- Values can be shown as kWh, CO2 or as a currency
设计
机械特性
接线盒
标准接线盒的材料为铸铁，标准位置处于机座*，且自身可4×90o 旋转安装，从而使电缆可以从各个方向进入。所有接线盒都有两个进线孔，其中一个进线孔采用葛兰密封，另一个进线孔采用螺塞密封。
接线盒位置
接线盒除标准位置外，还可处于电动机机座的左侧或右侧。电动机接线盒位置可以在电动机订货号的* 16 位用数字 表示出。
接线盒的位置是指从电动机驱动端来看的位置。
■ 标配接线盒在**部，电动机订货号的* 16 位数字为 4；
■ 接线盒在右边，电动机订货号的* 16 位数字为 5；
■ 接线盒在左边，电动机订货号的* 16 位数字为 6。
当电动机的接线盒位置与其它部件冲突时，可以将接线盒从驱动端移到非驱动端（选件号：H08）。
接线盒的进线孔
除非另作规定，否则进线孔的标准位置如下图所示。接线盒可以按照图示的位置旋转。
■ 朝向驱动端
接线盒旋转 90°，进线口朝向驱动端，选件号为 R10。
对于 FS80 ~ 112 的带法兰（IM B5）电动机，只有接线盒在非驱动（选件号：H08）时，才可以选择进线孔朝向驱动端。
■ 朝向非驱动端
接线盒旋转 90°，进线口朝向非驱动端，选件号为 R11。
■ 朝向左侧（与标准方向相反）
接线盒旋转 180°，进线口位置相反，选件号为 R12。
如果接线盒的位置改变时（如右侧或左侧），须要检查进线孔的位置是否方便进线。必要时，可以同时订购其它选件（R10，R11 和 R12）。
冷却与通风
所有电动机标配装有径流（离心）式冷却风扇，其冷却效能与电动机的旋转方向无关（冷却方法符合 IEC60034-6 标准的 IC411）。
对于某些应用，可以考虑配置独立驱动风扇 ，如，
■ 电动机在低速运行时，推荐使用独立驱动风扇，从而使电动机得到有效利用；
■ 电动机在明显**额定同步转速的速度运行时，同样推荐选用独立驱动风扇，这样有助于降低电动机噪声。
独立驱动风扇的选件号为 F70。当安装独立驱动风扇时，电动机的长度将增加 ?L。

-/gbadicf/-

上海西熙工控自动化有限公司是一家专业从事西门子工业自动化产品和数控系统销售、技术服务及培训的工程服务公司。 销售代理西门子WINCC组态软件,西门子PLC编程软件,西门子PLC,S7-200CN/S7-200/S7-300/S7-400/S7-1200/(6ES7/6GK/6AV/6FC/6SN/6FX/6SE/6RA/6DD/7ML/7MH/7KM/7MF/3RV/3RH/3TF)西门子PROFIBUS-DP总线，RS485总线接头，CP网卡，变频器，触摸屏，低压电器，数控伺服备件。 “信誉**，客户至上”是公司成立之初所确立的宗旨，在公司**的严格要求和员工们不折不扣地贯彻执行下发展延续至今。“假一罚十”一直是我公司的主动承诺。 我公司致力于专业推广西门子**自动化系统和驱动产品，所经营产品范围包括：LOGO!通用模块；SIMATIC S7-200、S7-300、S7-400系列可编程控制器； SIMATIC HMI面板，工控机，编程器；工业PROFIBUS、以太网及无线通讯等相关产品；正版PCS7 软件、WINCC组态软件、STEP 7编程软件；SITOP工业开关电源；通用型、工程型变频器，直流调速装置等。随着技术的发展和产品的较替，高新产品的出现层出不穷，我公司也紧随西门子脚步争取为广大客户提供较新的自动化产品：SIMATIC S7-1200系列PLC；SIMATIC BASIC HMI面板；G120、G130、G150、S120等全新SINAMICS家族驱动产品；PCS7 V7.1和较新的STEP7 Basic平台软件等。公司各类产品齐全，货量充足，能够满足客户紧急大量现货需求，保证工期进度。 请相信上海西熙工控自动化有限公司是您忠诚的长久的合作伙伴，我们愿与广大客户携手向前，共同进步！