耐摩擦陶瓷油墨，抗刮伤陶瓷油墨

耐温性：80-120℃*720hr无变化-循环烘烤
耐温性：120-250℃*680hr无变化-循环烘烤
耐温性：250-550℃*650hr无变化-循环烘烤
耐温性：680-1400℃*720hr无变化-循环烘烤
使用方法：
    1 印刷前先*印件表面的尘埃及油渍，可用无水乙醇（酒精）或抹字水*
     2 将油墨搅拌均匀，根据当时的实际环境条件选用稀释剂：快干，中干，慢干，稀释剂
     3  在印刷细小线条，图案，文字若出现字体扩撒，毛刺，模糊不清的现象，请选用本系列的透明色膏
    4  适合77-150t的网版印刷，请用户据实际情况取合适网目
①
印刷前先*印件表面的尘埃及油渍，可用无水乙醇（酒精）或抹字水*（本司皆可提供）
②
将油墨搅拌均匀，根据当时的实际环境条件选用稀释剂：快干、中干、慢干稀释剂，一般情况为冷天（≤15℃）选用快干剂，而热天（≥30℃）选用慢干剂。
③
在印刷细小线条、图案、文字时若出现字体扩散，毛剌、模糊不清的现象，请选用本系列的透明色膏或通用慢干膏。
④
适合77—150t的网版印刷，请用户据实际情况先取合适网目。
⑤
**固化温度表：温度（℃）0190时间(min)45302015104、注意问题：
①
印前请**试印，测试油墨对印材的匹配性，防止出现材料品种不同而引起质量问题。
②
稀释剂一般情况下是添加20%—30%间实际操作时根据使用情况及环境条件来调节油墨粘度。
③
印刷后墨层的干燥会因所承印底材的不同而有所差异，为确保印后质量，请按实际情况选定干燥方式及时间。
④
本品为易燃品，使用前后请将油墨容器*密封且置于阴凉通风处保存，避免接触高温和明火。
⑤
本品对人体有一定的刺激性，在使用过程中请做好个人防护，避免接触皮肤或误入眼内，如不小心溅入眼内，请先马上用大量水冲洗，或就医。
⑥
本品自生产之日起保质期限为两年，过期请重新测试其可用性。
5、技术参考数见下表：检验项目检验结果测试条件油墨12umHigh temperature resistant ceramic ink
Temperature resistance: no change in *720hr at 80-120
Temperature resistance: no change in *680hr at 120-250
Temperature resistance: no change in *650hr at 250-550
Temperature resistance: no change in *720hr at 680-1400
Using method:
1 printing before to remove dust and grease on the surface of the printed matter, available ethanol (alcohol) or with water to remove the word
2 ink mixing, diluent was selected according to the actual environmental conditions: dry, dry, dry slowly, thinner
3 in printing fine lines, patterns, text if there is a font spreading, burr, ambiguous phenomenon, please use this series of transparent color cream
4 screen printing for 77-150t users, please select the appropriate mesh according to the actual situation
1.
Before printing to clear the print surface dust and grease, can use anhydrous ethanol (alcohol) or wipe the word water removal (our company all can provide)
2
By mixing ink, according to at the time of the actual environmental conditions of the chosen diluent: fast drying, dry, thinner slow dry, generally for cold weather (less than or equal to 15 DEG C) selection and quick drying agent, and hot days (more than or equal to 30 DEG C) selection slow drying agent.
3
In printing fine lines, patterns, text if the font for the spread and burr, ambiguous phenomenon, please use this series of transparent color paste or general slow dry paste.
4.
Screen printing for 77 - 150t, please take the appropriate mesh according to the actual situation of the user.
5.
The recommended curing temperature (0190 DEG C) thermometer: time (min) 45302015104, pay attention to the problem:
1.
Please try printing prepress first, matching test of ink printed material, to prevent quality problems caused by different materials.
2
In general case is added 20% - 30% between the actual operation according to the use and environmental conditions to adjust the ink viscosity.
3
After printing ink drying because of the differences of the printing substrate of different, to ensure the printing quality, please according to the actual situation of the selected drying method and time.
4.
This product is flammable, use the ink container completely sealed and placed in a cool ventilated place, avoid contact with high temperature and open flame.
5.
This product on the human body has certain stimulation, in use process, please do personal protection, avoid contact with skin or strayed into the eyes, such as accidentally splashed into eyes, please first immediately flush with plenty of water, or medical treatment.
6
This product has a shelf life of two years since the date of production.
5, the technical reference number see table: test project test results test condition ink 12um

上海凯贤印刷科技有限公司是壹家以油墨生产.印刷耗材贸易.印刷加工为壹体的公司。凯贤科技公司座落在交通便利的嘉定安亭镇，紧靠F1**赛车场。公司占地面积10000平方米，是壹家以研制、生产**油墨为实体，同时经营各类相关辅助器材的科工贸壹体化大型企业。以ISO9001质量认证体系为基础，以欧美EN-71PART3、日本ST-MARK、美国ASTM检测体系为标准，生产适用於丝印、移印、胶印、喷涂等工艺系列油墨产品，为电子电器、纺织服装、日用制品、文体用品、包装印刷、广告展示、玩具业等国内外众多行业领域的着名**运营商提供**服务，备受着业界的信赖与推崇。凯贤科技在新时期确立了新的发展战略，提出了“科研先导，人才运营，整合资源，**经营”的企业经营方略。与国内外**油墨技术研究机构建立战略合作夥伴关系，在不断提高完善现有产品质量的同时，致力於新产品的研制开发。同时完善企业运营机制，积极吸纳各类人才，建立*、和谐、热忱、专注的顾问型服务团队，运用行之有效的营销、管理策略，增强了企业与客户的可持续发展动力与优势。 
　　作为中国丝网印刷行业协的会单位和中国网印及制像协会的成员，凯贤科技深深感受到自己肩负着推动中国丝网印刷、制像事业走高速健康发展道路的历史使命。凯贤人决心籍着自身综合实力，结合各界有效资源，在：“良好、承诺”的企业****理念的指引下，坚持耕耘，壹直进步着，为创建“行业*壹**”而奋进！