USB-ML-UNIVERSAL-FX飞思卡尔单片机下载器

 
用户下单前请先了解官方信息，确定会用后再购买。美国进口**下载器，功能强大，支持芯片较多！本产品配件齐全，拿到货后**时间测试并检查配件，有问题请到货三天内提出，我司配合解决问题，过期只能自己联系P&E公司请求售后服务。已测试可在CW10.X（暂不支持S12）下使用，其它环境待确认！P&E’sUSB Multilink Universal FXis ahigh-speed, all-in-one development interface which allows a PC access to the Background Debug Mode (BDM) or JTAG interface on many different Freescale MCU architectures (see complete list below). The FX\"s high-speed USB interface allows communications between your Windows machine and the standard debug connector on the target. The Freescale microcontrollers are supported via the multiple headers located on the USB Multilink Universal FX. The product photos to the left of this page show how the headers can be accessed by simply flipping open the plastic case. Ribbon cables suitable for a variety of architectures are included.Supported Freescale Devices:KinetisQorivva MPC55xx/56xxColdFire +V1/ColdFire V1ColdFire V2/3/4Power Architecture PX SeriesHC(S)12(X)S12ZHCS08RS08DSC683xxHC16NOTE:If you are using older P&E software with the USB Multilink Universal FX, you may need to upgrade to a more recent version that supports the FX. You may checkhereto see if your software supports the FX.The USB Multilink Universal FX includes all the features of P&E\"s standard Multilink interfaces, plus these additional benefits:Lightning fast! Up to 10X faster communications speed than P&E\"s other Multilinks*Can provide power to the target MCUI/O line clamping for added protectionSupports additional Freescale devices*The exceptional performance increases seen with the USB Multilink Universal FX are limited to synchronous architectures:Kinetis, Qorivva, Coldfire V2-V4, Power Architecture PX Series, DSC, and HC16/683xx.By using theUSB Multilink Universal FX, the user can take advantage of the background debug mode to halt normal processor execution and use a PC to control the processor. The user can then directly control the target’s execution, read/write registers and memory values, debug code on the processor, and program internal or external FLASH memory devices. The USB Multilink Universal FX can also provide power to your target MCU, either 3.3V or 5V.TheUSB Multilink Universal FXis natively supported by recent versions of CodeWarrior?, current P&E software applications, and toolchains from many Freescale partners including IAR, Keil, Cosmic, and Green Hills (check with the vendor for device compatibility). A list of supported software can be foundhere.For many of the supported processors, P&E has a set of interface libraries allowing the user to write their own Windows-based application which interacts with P&E\"s debug interface.This interface is USB 2.0 compatible, and it is also backwards compatible with USB 1.1 ports.NOTE: For production usage, see either theCyclone PROorCyclone MAXstand alone programmer and debug interface, depending on which processor you are working with. Acomparison chartis available below to help you choose the appropriate interface.FEATURES:High-speed USB interface from PC to Multilink allows for fast, easy programming and debugging -- with the ease and compatibility of the USB interface.Draws power from USB interface-- no separate power supply required (draws less than 1mA from the target).Can be used to power target MCU.Target Voltage: 1.6V-5.25VTarget Frequency: 16Khz-50Mhz (applies to HCS08, RS08, CFV1, S12Z, or HCS12X only)I/O line clamping for added protectionAuto-frequency detection + trimming capabilities for HCS08 devices.Auto-frequency detection for HC(S)12(X) devices.Generates programming voltage on RESET line for RS08 devices.Includes:One (1) USB 2.0 High Speed Cable, Type A to Type B, 6-ft.One (1) 6-pin 0.100"; pitch ribbon cable for connecting to RS08, HCS08, HC(S)12(X), S12Z, ColdFire V1/V1+ targetsOne (1) 10-pin 0.100"; pitch ribbon cable for connecting to HC16/683xx targetsOne (1) 14-pin 0.100"; pitch ribbon cable for connecting to QorivvaMPC5xxx, Power ArchitecturePX Series,DSCtargetsOne (1) 26-pin 0.100"; pitch ribbon cable for connecting to asynchronous ColdFire V2/V3/V4 targetsOne (1) 20-pin 0.100"; pitch ribbon cable for connecting to Kinetis targetsOne (1) 20-pin 0.050"; pitch ribbon cable for connecting to Kinetis targetsRecommended AccessoryThe USB Multilink Universal FX includes a ribbon cable for connecting to ColdFire V2-4 targets, however the MCF5272 & MCF5206(E) devices will require a separateadapter cable(not included) to synchronize the communications **s (as these devices do not do this on-chip).温提示：1.请在拍下宝贝前先联系,具体的数量单价不同，还有不同封装和后缀！
2.商品拍下后，请您及时安排付款，并在购物里备注您的详细资料，以便发货。
3.此报价为不含税价。
4.如果您收到货了对我宝贝和服务满意，请记得打5分哦，作为您给我们的奖励和肯定！
5.如果您不满意，请及时与我们联系，我们将服务到您满意为止！

批号 : other ;
封装 : other ;
型号 : 0 ;
** : 0 ;
类型 : 通信IC ;

深圳市玖鼎诚业科技有限公司（简称“玖鼎诚业”）于2014年成立，总部位于深圳，是**良好的电子元器件*服务分销商。作为完整的供应链的*环节，玖鼎诚业专注于为**的EMS和OEM、ODM客户提供**的物料供应服务和**的库存寄售服务。经营范围包括半导体（IC、模块、分立器件、传感器和转换器、RF元件、开发套件）、无源元件（电阻、电容、电感、晶振等），以及互连、机电和光电产品等。 本着以“奋斗者为本”的企业文化。 玖鼎诚业坚持以持续的渠道**为客户不断创造**。公司坚持线上线下相结合发展思路，玖鼎诚业先后入驻了淘宝、阿里巴巴等在线平台，为客户提供包括查询、在线采购等在内的线上业务服务。 凭借不断增强的**能力和**的服务我们已赢得**客户的信任与支持。 玖鼎诚业经营理念 公司宗旨： 诚信，务实，责任，发展。 公司远景：为中国电子产业供应服务的发展贡献出自己的力量。 公司目标：成为中国较好的电子元器件分销商之一，做行业内良好的线上线下电子服务供应平台，成为客户心目中可以选择的良好电子供应商、良好合作伙伴。 实现模式：把****的电子元器件产品提供给客户，把较新的市场动态，**的库存信息及时提供给客户。 公司理念：视质量为**、视信誉为生命。 主营范围：主营开发系统套件,继电器，传感器，连接器，电源模块，开关器件，风扇，电机，电池，LED液晶，滤波器,电容,二、三级管,调节器，放大器，混频器，转换器，存储器类，单片机，处理器，工控类，模拟器件及周边电路，功率器件及无源器件类; 与国外多家*电子厂商：LT,IR,XILINX,AMPHENOL、NS、TDK、3M、AMP/TYCO、Fairchild、TOSHIBA、HIT、MIT、OMRON、MOLEX、AVX、TI、MAX、ADI、Intersil等有长期的合作关系，随时可从新加坡、美国、欧洲、日本和中国香港直接进货，公司长期备有大量**, **充足货源，及时向**发货。 
**名称 : SMI，GE,精量，ALL SENSORS,Freescale