1,本公司有18年的承接OEM业务生产经验。欢迎来样,来图,来方案生产。
2,本店有实体工厂,而且工厂店跟旺铺同步销售,难免出现断货缺货的情况。请各位旺友拍之前询问有没有库存。
3,业务联系Q,并注明来意。手机电话:,徐先生。
4,谢谢各位旺友合作!
立体声模式(双声道驱动)
每声道平均持续输出功率
8Ω/FTC 20Hz - 20kHz/0.1% THD
1050W
4Ω/FTC 20Hz - 20kHz/0.1% THD
1100W
2Ω/FTC 20Hz - 20kHz/0.1% THD
1600W
8Ω/EIA 1 kHz/0.1% THD
1800W
4Ω/EIA 1 kHz/0.1% THD
2000W
2Ω/EIA 1 kHz/1% THD
2500W
桥接单声道模式
平均持续输出功率
8Ω/FTC 20Hz - 20kHz/0.1% THD
3200W
8Ω/EIA 1 kHz/0.1% THD
3600W
4Ω/EIA 1 kHz/1% THD
5000W
信噪比(20 Hz - 20 kHz)8Ω
> -100分贝
失真(SMPTE-IM)
< 0.02%
8Ω输入灵敏度
1.42V(+5.3 dBu)
电压增益
64×(36dB)
输出电路类型
H类,3级
高度
3U
典型, 1/8粉红噪音,4Ω
13.9A
较端条件, 1/3粉红噪音,4Ω
26.9A
RMX 5050 power amplifier represents the state-of-the-art in professional quality performance at an affordable price. Perfectly suited for a wide range of sound reinforcement applications including professional touring, performing musicians, and mobile entertainers, the RMX 5050 is optimized to deliver high levels of sustained power, extraordinary audio performance and road-proven reliability.
Like its smaller sibling (the RMX 4050HD), the RMX 5050 features a three-tier, Class H design. The RMX 5050 is extremely efficient at real world power levels. Less AC current is wasted and more goes into producing useful audio power. The RMX 5050 uses the best available component upgrades to increase peak power by 25% over the RMX 4050HD.
Like all RMX amps, the RMX 5050 features balanced 1/4"; TRS, XLR and barrier strip inputs, binding posts and Neutrik Speakon® outputs, front-mounted gain controls, plus ** and clip LED indicators to monitor performance.
FEATURESThe new flagship of the RMX line, the RMX 5050 provides extremely high power and represents tremendous value
The RMX 5050 provides advanced thermal performance, delivering higher continuous power in 2-ohms stereo or 4-ohms bridged applications
Dual mono, high current power supply for increased reliability and performance
3RU chassis only 16"; deep
Professional quality performance - incorporates road-proven QSC designs
High-current toroidal transformers for greater two-ohm power and low noise
Independent user-defeatable clip limiters reduce distortion
Selectable low-frequency filters (30 Hz or 50 Hz) protect speakers and increase headroom
Balanced 1/4"; (6.3 mm) TRS, XLR, and barrier strip inputs for maximum flexibility
Binding post and Neutrik Speakon outputs
Front mounted gain controls for easy access
Signal and Clip LED indicators to monitor performance
3-year warranty. An optional 3-year extended service contract is available. Ask your dealer for details.
SPECIFICATIONSRMX 5050 STEREO MODE, Both Channels Driven8 ohms
FTC 20 Hz - 20 kHz, 0.1% THD
EIA 1 kHz, 0.1% THD
1050 W
1100 W4 ohms
FTC 20 Hz - 20 kHz, 0.1% THD
EIA 1 kHz, 0.1% THD
1600 W
1800 W2 ohms
FTC 20 Hz-20 kHz 0.1% THD
EIA 1 kHz 1% THD
2000 W
2500 W BRIDGE-MONO MODE8 ohms
FTC 20 Hz-20 kHz 0.1% THD
EIA 1 kHz 0.1% THD
3200 W
3600 W4 ohms
EIA 1 kHz 1% THD
5000 WDistortion (SMPTE-IM)Less than 0.02%Distortion (Typical)
20 Hz - 20 kHz: 10 dB below rated power
1 kHz and below: full rated power
Less than 0.02%
Less than 0.02%Frequency Response
20 Hz - 20 kHz, 8 ohms, LF filter bypassed, +0/-1 dB
5 Hz - 50 kHz, 8 ohms, LF filter bypassed, +0/-3 dBDamping FactorGreater than 250 @ 8 ohmNoise (unweighted)100 dB below rated output (20 Hz - 20 kHz, 8 ohm load)Input Sensitivity1.42 Vrms for 1050 watts into 8 ohmsVoltage Gain64x (36 dB) for 8 ohm loadInput Impedance20k ohm balanced, 10k ohm unbalancedControls Front:
Controls Rear:
AC power switch, Ch. 1 and Ch. 2 gain control
10-pole DIP switch featuring LF filter on/off, LF filter 30/50 Hz, Clip Limiter on/off controls for each channel and switches for selecting Stereo, Parallel, or Bridge mode. Push-button circuit breaker for each channel.Indicators
Power-On: Green LED, Protect: Red LED
Signal -30dB: Yellow LED, Clip: Red LEDConnectors Input:
Connectors Output:XLR female, TRS (1/4";), and barrier-strip screw terminals, each channel
Binding posts and Speakon® outputs (Ch. 1 Speakon wired for biamp)CoolingContinuously variable-speed fan, rear-to-front air flowAmplifier Protection
Short circuit, open circuit, thermal, ultrasonic, and RF protection. Stable into reactive or mismatched loadsLoad ProtectionOn/off muting, DC fault output crowbarPower Requirements100, 120 or 240 Volts AC (±10%) 50-60 Hz (factory configured)
120V models require 20 Amp service and are supplied with a NEMA 5-20 plug on the cordset.Dimensions19"; (48.3 cm) wide, 5.25"; (13.3 cm) tall, 15.9"; (40.39 cm) overall depthWeight75 lbs (34.02 kg) net, 87 lbs (39.46 kg) shipping
广东恩平话筒公司
功放机LAB
功放
LAB功放
LAB
开关电源功放
**音响
**开关电源功放
调音台
舞台音响
方孔接线柱
SLX24
音箱
音响功放电源
调音台4路
皇冠线
数字功放
小功放
卡拉OK音响设备音箱
音响
麦克风管
电脑麦克风
无线麦克风
迷你音箱
飞利浦组合音响
麦克风
插
电压 : 220(V) ;
尺寸 : 3U(cm) ;
频率范围 : 20-20k(HZ) ;
** : SDOUL ;
加工定制 : 是 ;