较耐摔的手机塑胶原料PC/ABS 合金PC-345 恩帝供应商

较耐摔的手机塑胶原料PC/ABS 合金PC-345 物性资料表
General   
Material Status  Commercial: Active 
 
Availability  Asia Pacific 
 Europe 
 North America 
 
 
Features  General Purpose 
 High Flow 
   
 
Uses  General Purpose 
 
RoHS Compliance  RoHS Compliant 
 
UL File Number  E56070 
 
Forms  Pellets 
 
Processing Method  Injection Molding 
 

ASTM & ISO Properties 1 
Physical Nominal Value Unit Test Method 
Specific Gravity 1.10 g/cm3 ASTM D792 
Density 1.10 g/cm3 ISO 1183 
Melt Mass-Flow Rate (MFR) (260°C/5.0 kg) 20 g/10 min ASTM D1238 
Melt Volume-Flow Rate (MVR) (260°C/3.8 kg) 13.0 cm3/10min ISO 1133 
Molding Shrinkage - Flow 0.40 to 0.60 % ASTM D955 
Water Absorption (23°C, 24 hr) 0.40 % ASTM D570 
Spiral Flow Length 2 (260°C) 119 mm Internal Method 
Mechanical Nominal Value Unit Test Method 
Tensile Strength (Yield, 23°C) 49.0 MPa ASTM D638 
Tensile Stress (Yield) 45.0 MPa ISO 527-2/50 
Tensile Stress (Break) 39.0 MPa ISO 527-2/50 
Tensile Elongation (Break, 23°C) 85 % ASTM D638 
Tensile Strain (Break) 80 % ISO 527-2/50 
Flexural Modulus (23°C) 2260 MPa ASTM D790 
Flexural Modulus 3 2300 MPa ISO 178 
Flexural Strength (23°C) 73.5 MPa ASTM D790 
Flexural Strength 3 75.0 MPa ISO 178 
Impact Nominal Value Unit Test Method 
Notched Izod Impact (3.18 mm) 480 J/m ASTM D256 
Notched Izod Impact Strength 39 kJ/m2 ISO 180/1A 
Hardness Nominal Value Unit Test Method 
Rockwell Hardness (R-Scale) 108   ASTM D785 
Thermal Nominal Value Unit Test Method 
Deflection Temperature Under Load (1.8 MPa, Unannealed) 95.0 °C ASTM D648 
Heat Deflection Temperature (1.8 MPa, Unannealed) 95.0 °C ISO 75-2/A 
Heat Deflection Temperature (1.8 MPa, Annealed) 106 °C ISO 75-2/A 
Vicat Softening Temperature 125 °C ASTM D1525 4 
Vicat Softening Temperature       
-- 125 °C ISO 306/A50 
-- 110 °C ISO 306/B50 
CLTE - Flow (40 to 100°C) 0.000060 to 0.000080 cm/cm/°C ASTM D696 
RTI Elec     UL 746 
1.50 mm 60.0 °C   
3.00 mm 60.0 °C   
RTI Imp     UL 746 
1.50 mm 60.0 °C   
3.00 mm 60.0 °C   
RTI Str     UL 746 
1.50 mm 60.0 °C   
3.00 mm 60.0 °C   
Electrical Nominal Value Unit Test Method 
Arc Resistance PLC 6   ASTM D495 
Comparative Tracking Index (CTI) PLC 2   UL 746 
High Amp Arc Ignition (HAI)     UL 746 
1.50 mm PLC 0     
3.00 mm PLC 0     
High Voltage Arc Tracking Rate (HVTR) PLC 2   UL 746 
Hot-wire Ignition (HWI)     UL 746 
1.50 mm PLC 4     
3.00 mm PLC 3     
Flammability Nominal Value Unit Test Method 
Flame Rating     UL 94 
1.50 mm, ALL HB     
3.00 mm, ALL HB     
Flammability Classification     IEC 60695-11-10, -20 
3.00 mm HB40     
1.50 mm HB75     

   恩帝塑胶位于中国广东，恩帝塑胶原料在塑胶制品领域，已树立了良好的口碑。我们诚信经营，货真价实，发货快，质量好，服务好。主要销售工程塑料，改性塑料等。**提供物性表,ROHS(***)报告、UL黄卡认证、材质证明COA及物质*资料表(MSDS)等.
   恩帝塑胶主要销售**有：德国拜耳，日本帝人，日本三菱，日本出光，沙伯基础SABIC，闽台奇美，韩国LG，美国杜邦，德国巴斯夫，美国首诺，法国罗地亚，日本东丽，日本旭化成，日本宝理，韩国工程塑料，闽台长春，闽台新光，荷兰*，日本三井化学，日本可乐丽，雪佛龙菲利普，日本住友，瑞士EMS等。
   恩帝塑胶主要经营塑胶原料有PC,PC/ABS,POM,PBT,PPS,LCP,PA66,PA6,PA46,PA11,PA12,PA6T,PA9T,PPA等。支持货到付款，欢迎咨询下单。