G80547 氮气检测分析仪,氮气检测分析仪,氮气检测仪

 
产品说明
氮气检测分析仪 氮气检测仪 氮含量分析检测仪
型号：G80547

氮气检测仪广泛用于化肥、石油化工、空分以及生物发酵等工业生产过程中氮气含量的检测 .空分制氮、化工流程氮气纯度自动分析，磁性材料等高温烧结炉的保护性气体中氮含量分析；电子行业、玻璃、建材行业等工业生产过程中氮气纯度的在线检测。
一、概述
本仪器是采用测氧原理, 通过氧气传感器把气体中的氧浓度转换成电信号,经减法器的计算从而倒算出氮气含量，并直接显示被测气体中的氮气百分比含量。仪表采用**的*规模集成电路及5位半L E D高亮度数字显示器，具备数码拨盘设定下限控制功能，方便快捷。当被监控系统的氮含量**设定值时,控制触点启动，并有声/光同时报警。仪表还有4-20MA同步信号输出，并有自动稳零功能，仪器能直接显示十万分之一读数（99.999%），具有响应快、精度高、稳定、**、操作简便等特点。本仪器可利用空气的氮气的含量79.0%定标，操作方便，并设有量程自动转换电路，当氮气浓度大于90.3%时，这时仪器量程自动转换，读数为90.300%。
当氮气浓度**1号下限设定值时（假如是99.96%）,报警指示灯亮，同时有报警声响，1号报警输出开关启动（可当预警提示,或启动相应的设备）.. 当氮气浓度继续下降**2号下限设定值时（假如是99.93%）, 2号报警输出开关启动.（可根椐需要启动相应的控制设备）..这样较有利于产品质量的生产管理.如果只用1路设定值,那就把2号下限控制数码拨至90.00即可.2种仪表都带有4～20mA信号输出可与记录仪连接。
本仪器适用于变压吸附制氮机，空分设备，以及氮氧混合气中的氮气浓度分析、监测和控制。
二、产品特点
报警点及触点输出任意设置,N2 显示供用户选择,进口新型**命的离子流检测器，灵敏度高、响应速度快,上下限报警点能在全量程范,**的温度自动补偿系统，*环境温度的影响。
检测原理：传感器
监测气体： 氮气
三、技术指标：
1.测量范围 ：70～99.999%
2.精 度： 98～99.999±0.02％N2 ；
3.较小检测量： 0.001％
4.响应时间： ≦10秒
5.环境温度： 0～40℃；
6.环境湿度： ≤85%RH。；
7.电 源： 220V±10％；
8.稳 定 性：48小时内漂移小于±0.2％
9控制点容量：A C220 V 1 A
10.外形尺寸：160×160×80mm（长×宽×高）（开孔尺寸150×75）
11.重 量： 1.2Kg
12.记录输出：4～20mA
13.功 耗: ≤5 W
四、原理：
仪器由氧电极、放大器、比较器、减法器,报警器等部分组成。氧电极：为较谱法隔膜式，采用铂金为阴极，银氯化银为阳极，以聚四氟乙稀为渗透隔离膜，气样中氧可透过薄膜到达阴极，在650mV的较化电压下发生如下反应。
阴极：O2+H2O+4e→40H—
阳极：Ag++C1-→AgC1↓+e
反映可*达到平衡，同时产生一个极限扩散电流，此电流的大小正比于气样中的氧分压。此电流通过放大器放大，通过减法器由显示屏直接显示出被测气中的氮气含量，同时输出4-20电流.供外接记录仪或微机作数据记录，可使测量资料存档。另外信号经拨盘数码开关控制.，当被测气体中的氮气含量**过设定值时，仪器发出声,光报警.同时启动相应的控制继电器动作,以带动各类控制设备.
 
 
Product description
Instrument analysis nitrogen content of nitrogen analyzer nitrogen detector
Model: G80547
Nitrogen detector is widely used to detect content of nitrogen fertilizer, petrochemical industry, process of air separation and biological fermentation in industrial production. The automatic analysis of nitrogen air separation, chemical process the purity of nitrogen, the nitrogen content of the protective gas magnetic materials such as high temperature sintering furnace; online detecting purity nitrogen industrial production process of electronic industry, glass in the building materials industry, etc..
One, overview
This instrument is the use of measuring principle of oxygen, the oxygen sensor to the oxygen concentration in the gas is converted into an electrical **, through calculation and subtracter to deduce the nitrogen content, and directly display the measured nitrogen percentage content in gas. The instrument adopts the advanced large-scale integrated circuit and 5 - L E D high brightness digital display, digital dial setting the minimum control function, convenient and quick. When the nitrogen content of the monitored system is lower than the set value, the control actuation of contacts, and sound / light alarm simultaneously. Instrument and 4-20MA synchronous ** output, and auto zero function, the instrument can directly display the 1/100000 reading (99.999%), has the characteristics of fast response, high accuracy, stability, reliability, easy operation etc.. 79% content of this instrument can use air nitrogen calibration, convenient operation, and is provided with automatic range switching circuit, when the nitrogen concentration is greater than 90.3%, then the instrument automatic range conversion, a reading of 90.300%.
When the nitrogen concentration is lower than 1, the lower limit of the set value (if it is 99.96%), the alarm indicator light, and alarm sound, 1 alarm output switch (can be when the warning, or start the corresponding device). When the concentration of nitrogen continue to fall below 2, the lower limit of the set value (if it is 99.93%), No. 2 alarm output switch. (according to need to start the corresponding control equipment) management of production. This is more conducive to the quality of the products. If 1 road with the set value, then the 2 lower control digital dial to 90 to.2 instrument with 4 to 20mA ** output and the recorder.
The utility model is suitable for the pressure swing adsorption nitrogen making machine, air separation equipment, as well as the analysis, the concentration of nitrogen gas mixture of nitrogen and oxygen in the monitoring and control.
Two, product features against
Alarm and contact output arbitrarily set, N2 display for the user to choose, ion import new long-lived flow detector, high sensitivity, fast response,  alarm point in the whole range of fan, automatic temperature compensation system with high accuracy, eliminate the influence of environmental temperature.
Detection principle: the sensor
Monitoring of gas: nitrogen
Three, technical indicators:
1 measuring range:70 ~ 99.999%
2 precision: 98 ~ 99.999 ± 0.02%N2;
3 the minimum detection amount: 0.001%
Response time: 4 ≤ 10 seconds
5 environmental temperature 0 ～ 40 ℃;
Humidity: 6 ≤ 85%RH. ;
7 power supply: 220V ± 10%;
8 stability: 48 hour drift less than 0.2%
The 9 control point capacity: A C220 V 1 A
10 dimensions: 160 x 160 x 80mm (length * width * height) (hole size 150 x 75)
11 weight: 1.2Kg
The 12 recording output: 4 ~ 20mA
Power consumption: 13 ≤ 5 W
Four, the principle of:
The instrument by the oxygen electrode, amplifier, comparator, subtracter, alarm and other parts. Oxygen electrode for polarography: diaphragm type, using platinum as the cathode, silver silver chloride as anode, with PTFE as osmotic membrane, gas like oxygen permeable film to the cathode, the following reaction in the polarization voltage of 650mV.
Cathode: O2+H2O+4e → 40H-
Anode: Ag++C1- → AgC1 ↓ +e
Reflection can rapidly reach equilibrium, while producing a limiting diffusion current, this current is proportional to the partial pressure of oxygen in the gas sample. This current is amplified by an amplifier, the subtractor by direct display shows the measured nitrogen gas, while the output 4-20 current. For external recorder or computer data recording, can make the measurement data archive. The other ** by the dial digital switch control., when the measured nitrogen content in the gas exceeds the set value, the instrument sound, light alarm. At the same time start the corresponding control relay, to various kinds of control equipment.
 
 




氮气检测仪 : 变压吸附制氮机，空分设备 ;
电源 : 220V±10％ ;
重量 : 1.2Kg（kg） ;
尺寸 : 160×160×80mm（mm） ;
电压 : 220V（v） ;
测量精度 : ±0.02％ ;
测量对象 : 变压吸附制氮机，空分设备 ;
测量范围 : 70～99.999% ;
类型 : 便携式 ;
型号 : G80547 ;
** : 冠测 ;
加工定制 : 是 ;

北京冠测精电仪器设备有限公司（系原*大学机械厂仪器加工部与*大学精仪系联合成立）是集**设计、开发、生产与销售于一体的**股份制企业，专注于新型材料试验机的研制、材料检测技术的提高及材料试验方法的**，是国内生产电子**材料试验机的先导企业之一。 冠测公司研发团队是以*大学精密仪器系为**与中科院自动化*、*科技大学等全国数十所科研院所紧密合作，拥有行业内较良好的、*的研发力量及技术团队。 冠测公司以精美的产品、**的技术、精良的品质、精心的服务赢得了广大用户和市场份额，产品**全国、东南亚及欧洲，拥有一大批国内外*科研院所及企业用户，是国内试验机行业发展速度较快的企业之一。 冠测—BEST-TEST 冠测服务=全国**两年质保服务+每月定期回访 冠测技术=以*大学精密仪器系为**+全国数十所科研院校紧密合作 冠测品质=标准的生产线+对产品的精益追求+严格规范的测试 冠测价格=科学的管理成本+大规模采购效应 冠测客户=客户的重复购买+客户的转介绍 冠测**=为客户提供较好的产品+较好的服务 冠测理念=今天的质量就是明天的市场 冠测—BEST-TEST 产品为冠  源于精测  **摇篮 **之选 自强不息  厚德载物  厚积薄发 高速增长 可根据客户的不同需求开发标准、非标准设备 
**名称 : 冠测