工业级HDBaseT 4K 延长器100米 4K传输器 网络延长器 POE供电

 
HDMI EXTENDER,HD BaseT网线延长器,R45延长器产品编码：1050228-2255产品型号：HBT-E100玩视科技的HBT-E100,采用HDBaseT是以网络传送为基础的标准,可以将音频、视频、网络、控制信号和供电线路...
 POE供电，带ARC，双向IR控制
标准4K×2K延长器 
HDMI Extender over Cat5e/Cat6
 (HD BaseT)
 
 
 
 
Thank you for purchasing this product. For optimum performance and safety, please read the instruction carefully before connecting, operating or adjusting this product. Please keep the manual for future reference. 
 
Caution: 
The extender using UTP cable termination follows the standard of IEEE-568B.
 
 
I.  Introduction
The cat5e/cat6 HDMI Extender is a tool which can extend your HDMI ** over 328fts/100meters to a compatible display. It is designed to convert HDMI ** to standard HDBaseT ** which can be transmitted by Internet cable. It also supports Transfer Bidirectional Infrared control ** \\RS232 control **\\Internet ** together with the HDMI **, so you can control the Source in the Sink side which is 328fts outside, also you can control the Sink in the Source side which is 328fts outside using the HDMI Extender.
 
 
II.  Features
1. POE(Power Over Ethernet)function support, either TX or RX powered ,another don’t need power form the DC jack. POE Power Consumption less than 10W. ※ See the description 1
2. Use single UTP LAN cable (CAT-5E/6) to substitute HDMI cable to achieve long distances transmission.
3. UTP cable termination follows the standard of IEEE-568B.
4. Transmission distance:
100 meters: 1080P @60Hz36bit; 3D1080P@30Hz36bit;
70 meters: 1080P @60Hz@48bit; 1080P @120Hz@24bit; 3D1080P@60Hz@36bit 4K x 2K@30Hz@24bit.
5. HDMI V1.4 HDCP1.4 supported.
6. Full HD support: 1080p@60Hz@48 bit/pixels, 1080p@120Hz@24 bit/pixels, 3D 1080P60Hz and 4K x 2K@30Hz@24bit
7. Transfer Bidirectional Infrared control ** together with the HDMI **. ※ See the description 2.
8. Transfer Bidirectional RS232 control ** together with the HDMI **. ※ See the description 3.
9. Transfer Bidirectional Ethernet ** together with the HDMI **. ※ See the description 4.
 
III.  Package
1. HDMI Extender Transmitter ------------------------------------------ 1PCS
2. HDMI Extender Receiver ---------------------------------------------- 1PCS
3. Wideband IR Tx --------------------------------------------------------- 2PCS
4. Wideband IR Rx --------------------------------------------------------- 2PCS
5. 12V2.** DC Power Supply adapter --------------------------------- 1PCS
6. Operation Manual ------------------------------------------------------ 1PCS
7. Phoenix male jack--------------------------------------------------------2PCS
8. Mounting ears------------------------------------------------------------4PCS
 
 
 
IV.  Specifications
1. Frequency Bandwidth2.97Gbps
2. Transmitter Input/Output Ports1x HDMI Female port/2xCAT6
1x IR Tx/1x IR Rx/1xPhoenix
3. Receiver Input/Output Ports1xHDMI Female port/2xCAT6
                               1x IR Tx/1x IR Rx/1xPhoenix
4. Power Supply                   DC 12V 2.**
5. ESD Protection                  ± 8kV (air-gap discharge)
Human Body Model:             ± 4kV (contact discharge)
6. Dimensions (mm)               100(W) X 100 (D) X 25 (H)
7. Weight                         320g x 2
8. Operating Temperature          0°C ~ 40°C / 32°F ~ 104°F
9. Storage Temperature          -20°C ~ 60°C / -4°F ~ 140°F
10. Relative Humidity              20~90% RH (Non-condensing)
11. Power Consumption (Max)       20W
 
V.  Operation controls and Functions
Transmitter
 
1. RS232: Phoenix jack provide Serial port control ** from receiver or to receiver.
2. IR IN: Chanel 1 IR Receiver. Connect with Wideband IR Rx.
3. IR OUT: Chanel 2 IR Transmitter. Connect with Wideband IR Tx.
4. HDBaseT OUT: Standard HDBaseT ** output port. Connect HDBaseT receiver with a UTP cable follows the standard of IEEE-568B.
5. DC IN: Plug the 12V DC power supply into the unit.
6. LINK LED: The connection status indicating lamp.
※Illuminate: The Transmitter and Receiver is good connections.
※Flashing: The Transmitter and Receiver is poor connections.
※Dark: The Transmitter and Receiver is no connections.
7. DATA LED: The data status indicating lamp.
※Illuminate: The HDMI ** with HDCP.
※Flashing: The HDMI ** without HDCP.
※Dark: No HDMI **.
8. HDMI IN: HDMI input port. This slot is where you connect the HDMI source.
9. INPUT LED: The input status indicating lamp. This red LED illuminate when the HDMI ** plug in. 
10. ETHERNET: This slot provide Internet ** from receiver or to receiver.
11. UPDATE: System software update.
 
Receiver
 
1. RS232: Phoenix jack provide Serial port control ** from transmitter or to transmitter.
2. IR IN: Chanel 2 IR Receiver. Connect with Wideband IR Rx.
3. IR OUT: Chanel 1 IR Transmitter. Connect with Wideband IR Tx.
4. HDBaseT IN: Standard HDBaseT ** input port. Connect HDBaseT transmitter with a UTP cable follows the standard of IEEE-568B.
5. DC IN: Plug the 12V DC power supply into the unit.
6. LINK LED: The connection status indicating lamp.
※Illuminate: The Transmitter and Receiver is good connections.
※Flashing: The Transmitter and Receiver is poor connections.
※Dark: The Transmitter and Receiver is no connections.
7. DATA LED: The data status indicating lamp.
※Illuminate: The HDMI ** with HDCP.
※Flashing: The HDMI ** without HDCP.
※Dark: No HDMI **.
8. HDMI OUT: HDMI output port. This slot is where you connect the HDTV or monitor with HDMI cable 
9. OUTPUT LED: The output status indicating lamp. This red LED illuminate when the TV plug in with HDMI cable.
10. ETHERNET: This slot provide Internet ** from transmitter or to transmitter.
11. UPDATE: System software update.
HBT-E100 采用HDbaseT特制芯片传输技术，支持目前HDMI全部技术特性，支持传输**高清分辨率的HDMI信号，**大提升您的高清娱乐体验，用一根普通的网线，即可将电视以及其他显示设备与蓝光DVD播放器等娱乐设备连接起来，以实现家庭内部高清多媒体内容的融合式传播。这种未压缩的高清视频传输技术，能够延长未压缩高清多媒体内容传输的距离，扩大传播范围，简化安装，降低系统总成本。
 
 
 
工程定制**4K**高清延长器！

电源管理 : 支 ;
远程唤醒 : 支持远程唤醒 ;
分辨率 : 4K*2K ;
支持系统 : 其他 ;
类型 : 其他 ;
货源类别 : ** ;
上市时间 : 2013年 ;
型号 : HBT-E100 ;
** : 玩视 ;
建议零售价 : ¥1600.00 ;