厂价****供应造纸设备D型低浓水力碎浆机

产品简介：D型水力碎浆机 D type waterpower pulp machine
  采用了“D”形槽体和偏离中心位置之不理的节能型伏克斯转子，废纸和转子的接触较*，频率较高，大幅度缩短碎浆进间，在不增加动力和容积的情况下提高生产能力。转子和出浆盘高出碎浆机槽体底平面，在转子周围形成一个低压流区，便碎解过程中的粗大杂质从重渣口进入沉渣打井，理利用抓斗定期排出。
 D型水力碎浆机一般采用链板输送机进料，并配有铰绳机，以除去塑料包装袋、绳头、铁丝等缠绕性杂质，推荐的铰绳机型号为ZJS1如图所示。为较大限度的减少纤维流失，一般配用杂质分离机对沉渣打井中含有浆料的杂质进行处理，回收良浆。 
  
The equipment has used “D” shape trough body and out of center position fukesi rotor which is of energy conservation, the waste paper and the rotor will touch more rapidly,the frequency will be higher. Herewith,ot will large reduce the break-up time, In the situation of not increasing the power and capatity. It will improve the productivity. The rotor and the thick liquid plate are higher than the trough bottom plane. A low pressure area will be formed around the rotor, the rough impurity will be coming into the sediment well via heavy dregs orifice in the processing.The dregs will be vented regularly by the grab.
 The D type water power pulp kneader generally uses chain conveyor feed,outfitting rope crab machine in order to take out the plastic sack,the rope ,the iron wire, twining impurity and so on.The recommended rope crab machine model as the ZJS1 draft showing.For reducing the fibre to drain .Generally uses the impurity separating machine to process useful impurity in order to recycle the good thick liquid. 
D型立式水力碎浆机主要参数 
型号 
ZSDD5 
ZSDD10 
ZSDD15 
ZSDD20 
ZSDD25 
公称容积m 3 
5 
10 
15 
20 
25 
生产能力t/d 
25-40 
60-75 
80-120 
120-160 
150-180 
碎浆浓度% 
3 — 5%
加工定制 是 ** 方源

公司位于山东省 诸城市，主营 造纸制浆设备、污水环保处理设备、污泥压滤设备、纤维回收设备、机械制浆设备 等。方源机械公司经理王秀华秉承“顾客至上，诚实守信，互惠互利”的经营理念，坚持“客户**用户至上”的原则为广大客户提供优的服务。公司经理王秀华欢迎新老客户惠顾指导！联系人：王秀华， 。 郑重声明：产品标注价格仅供您参考，不作为交易价格标准。为维护您的利益请就具体产品价格及技术参数致电王秀华或  或来函致信邮箱：详细询问！