供应制造集装箱液体包装箱阀门耐压检测试验机

 
           阀门试压操作说明书
 
提示：该试压测试机使用交流电压220V，较大气压1.0兆帕（MPa），请时刻注意*！非**人员不得拆卸、维修！
 
Valve Pressure Test Machine User’s Manual
Caution: The Pressure Test Machine applies alternating voltage: AC220V and applicable maximum pressure of this machine is 1.2MPa. Non-professionals shall not disassemble, and repair the machine.
Operation Instruction:
1、SWITCH ON: Check whether the Machine is undamaged, and then plug into an AC220V power supply. The HMI  will show starting windows. Switch the “POWER ON OFF” to “ON”, the Machine will stay at standby mode.
2、PARAMETER SET UP: click on <PARAMETER SET UP> and enter password key to enter the parameter windows. Set up “Compaction Total Time”* and “Compaction Preparation Time”*, and then click <OPERATION> to wait for pressure test.  *Compaction Total Time is the period from compaction starts until pressure test end.  *Compaction Preparation Time is the period from compaction starts until prior to pressure test start.  * Time unit is in 100 millisecond (100ms).
3、PRESSURE LOCK ADJUSTION: Adjust compaction force to 0.9~1.0 MPa and pressure test force to 0.3 ~0.4 MPa.
4、PRESSURE TEST: Switch off the handle of the testing valve. Pour 50ml potable water into the valve cavity, and place it at the positioning disc on workbench with an O-ring seal on top. Make sure everything has been done, then click on “Compaction”, and the pressure test will start automatically. Alternatively, press the “Pressure Test” button to start the test manually. The HMI works as same as the buttons “Compaction” and “Pressure Test”.   *If there are abnormal situations occurs while the pressure test process, press the EMERGENCY STOP button immediately and switch off the POWER ON OFF.
5、AFTER THE PRESSURE TEST: Observe whether the bottom and the handle of the valve leak water or not. If yes, then it is unqualified and should be rejected. Only the water-tight one is satisfied product and should be code-sprayed and decontaminated after the removal of water.
6、After the work accomplished, the machine must be switched off and plugged off before operator leaving. 
 

产品用途 : 阀门是否漏水漏气耐压检测The valve is Water Leakage, leakage ;
重量 : 180（Kg） ;
外形尺寸 : 800×700×1800（mm） ;
产品规格 : 2MPa ;
加工定制 : 是 ;
测量精度 : ** ;
测量范围 : 0.1~2MPa ;
型号 : NY-1A ;
** : Qdyulidq/玉立电器 ;

公司成立于2005.9，主要产品有设计、制造PLC、变频器、伺服控制各类控制柜、生产线自动化工程、印染机械、纺织机械、包装纸箱机械、食品花生机械的控制系统，阀门、阀体漏水漏气耐压检测试验机，场桥转场、能源回馈节能控制柜、电梯控制柜.如:各种梳棉机控制柜、智能参数仪、电子计长仪，双色双面印花机控制柜、三色双面印花机控制柜、蜡印机控制柜、彩色蜡纹机控制柜、蜡液控制箱、角度传感器以及各种食品、花生机械控制柜，包装纸箱机械（生产线）控制柜等，机械设备壳体和控制柜、开关箱体钣金加工等，注重质量，讲究信用，追求**，愿意与广大客户合作共赢。
加工方式 : 来图加工;来样加工;来料加工;
工艺 : 钣金;电工组装;
**名称 : qdyulidq
质量控制 : 内部