批发单反相机 LCD2.8X取景器V1 液晶屏幕放大器 厂家**

1.中文描述
产品特色:
1）动态取景（视频拍摄）较稳定、较方便、较**，将您的数码相机*升级成一个手提摄像机；
2）在明亮的户外阳光下也可以较清晰地观察LCD液晶显示屏；
3）特别设计的放大功能，可将液晶显示屏放大2.8倍；
4）**镀膜的光学镜片
5）安装方便，防尘防灰；
6）左右180度视角，方便使用；
7）采用磁性材料，方便**安装和拆除，无磨损；
8）不会影响其它附件的安装和使用。
 
适用机型：

V1：FOR Canon佳能 5D2、7D 500D 等
 
V1框内尺寸：宽63x高47mm
V1框外尺寸：宽70x高56mm
 
2.英文描述
Application guide:
 
1.Leave your camera recording for approximately 12 minutes before and just after the frame is applied – as the camera gets moderately warm during the recording it helps to develop a strong initial bond between the metal interface and your camera body.
2.But while you apply the interface frame set your camera to display a bright full screen image such camera menu in its brightest state it aid the correct and even placement of the interface frame.
3.Now, remove the paper backing and carefully apply the frame onto the camera body while ensuring an even placement around the LCD.
4.Apply pressure (message it with your fingers) to ensure better bond between the frame and camera.
5.Leave a weight onto the freshly applied frame at least for 15 minutes while your camera is recording as the heat generated will ensure a better first specially if you are in a hurry.
6.Initial bond strength of approximately 76% is achieved after 15 minutes.
The magnetic frame fits the screen of Canon 5D Mark II/7D/500D perfectly
 
Features:
Spontaneously transform your video enabled DSLR into a handheld video camera
Allow the use of LCD in bright outdoor daylight
Magnification: 2.8x
Optical lens
Easy to install and dust proof
Suitable for right or left eye users
Magnetic bracket allows easy installation and removal without any damage
 
Guide:
Leave your camera recording for approximately 12 minutes before and just after the frame is applied – as the camera gets moderately warm during the recording it helps to develop a strong initial bond between the metal interface and your camera body.
While you apply the interface frame set your camera to display a bright full screen image such camera menu in its brightest state it aid the correct and even placement of the interface frame.
Remove the paper backing and carefully apply the frame onto the camera body while ensuring an even placement around the LCD.
Apply pressure (message it with your fingers) to ensure better bond between the frame and camera.
Leave a weight onto the freshly applied frame at least for 15 minutes while your camera is recording as the heat generated will ensure a better first specially if you are in a hurry.
Initial bond strength of approximately 76% is achieved after 15 minutes.
 
Suitable For:
All 3 inch 4:3 LCD camera/camcorder;
Specifically for: Canon 5D Mark II/7D/500D.
 
Package including:
1x 2.8X LCD viewfinder V1
1x Magnetic Sticker
 


加工定制 是

深圳市众合网流科技有限公司 经销批发的电子产品、数码产品及周边配件、安防产品、摄影器材及周边产品、计算机**消费者市场，在消费者当中享有较高的地位，公司与多家零售商和工厂建立了长期稳定的合作关系。深圳市众合网流科技有限公司经销的电子产品、数码产品及周边配件、安防产品、摄影器材及周边产品、计算机品种齐全、价格合理。深圳市众合网流科技有限公司实力雄厚，重信用、守合同、**产品质量，以多品种经营特色和薄利多销的原则，赢得了广大客户的信任。
**名称 : 万欣/旅**