Kluber UNISILKON L 250 L---特种润滑脂

Kluber UNISILKON L 250 L/L 250L/ L250 L/ L250L---特种润滑脂
UNISILKON L 250 L

Special lubricating grease for tap water, beverage and heating valves & fittings

 

Description

UNISILKON L 250 L is a special lubricant based on silicone and PTFE for valves and adjusting mechanisms in the sanitary, beverage and heating sector.

UNISILKON L 250 L offers good penetration ability in small lubrication gaps and lube points of difficult

access.

As its viscosity is rather independent from service temperatures, UNISILKON L 250 L allows constant

actuating forces within the whole cold/hot water range of single-lever mixer taps.

UNISILKON L 250 L is resistant to cold and hot water, hot steam up to approx. 120/130°C. It is compatible with most substances in the foodprocessing and beverage industries

like beer, milk, juices, liquors, aqueous liquids as well as with acid and alkaline disinfectants.

UNISILKON L 250 L is not resistant to most organic solvents, strong acid and alkaline solutions.

UNISILKON L 250 L is also used as sealing grease and assembly aid for seals and packings in contact with cold water or hot steam.

The product shows a thermal stability up to approx. 160°C and low evaporation loss.

UNISILKON L 250 L complies with the guidelines of the German Federal Environmental Agency on hygiene requirements for lubricants in contact with tap water (as ofApril 15, 2003).

 

The product is certified by:

- Engler Bunte Institute of the University ofKarlsruhe,Germany(DVGW-KTW)

-Research Center,Great Britain(WRC)

- NSF 51 and 61 (USA)

- AS4020 (Australia)

- ACS (France)

 

Application

Tap water:

Ceramic disc valves

Single-lever mixer taps:

Ceramic discs and piston cartouches.

Mixer taps with two handles:

Swivel spouts, shower switches, shower heads etc.

Thermostatic mixer taps:

Thermo regulators, thermo elements etc.

Heating installations

Valves, thermostats, pressfit seals

 

Application notes

UNISILKON L 250 L is neutral towards metals, thermoplastics (e.g. ABS, PC ...) and elastomers (e.g. EPDM, NBR ...).

Prior to series application we recommend checking compatibility with elastomers under conditions similar to actual use, on the complete component.

 

UNISILKON L 250 L

? Excellent wetting power

? Operational smoothness due to a good viscositytemperature behavior

? Excellent resistance to water and hot steam

? High thermal stability

? Good sealing effect

? Neutral towards metals and plastics (thermoplastics and elastomers)

? Certified acc. To DVGW-KTW, WRC etc.

 

UNISILKON L 250 L can be applied by means of all customary application devices and the tampo print method. Please observe material safety data sheet.

 

Minimum shelf life

The minimum shelf life is approx. 36 months if the product is stored in its unopened original container in a dry, frost-free place.

 

Pack sizes

60 g tube

500 g cartridge

750 g cans

30 kg bucket

上海梦泓实业有限公司是一家**从事**进口****润滑油、润滑脂、机械设备等中国区销售的股份制企业。公司经营代理**有：KLUBER（克鲁勃）润滑剂、道康宁（DOW CORNING）润滑剂、MOLYKOTE（摩力克）、FAG（舍佛勒）润滑剂、日本昭和壳牌（SHELL）、日本sumico（住矿）、日本油脂（NIPPON GREASE）、新日本石油（ENEOS）、COSMO石油、NPC（日本矿油）、日本协同（KYODO YUSHI）、日本出光(IDEMITSU) 润滑油、美国杜邦（DUPONT） 、英国BP、嘉实多、英荷壳牌、MOBIL、长城、昆仑、海联工业气雾剂系列等****。