供应六安美孚润滑油 美孚循环油11月较新报价

Mobil SHC 600 Series

Supreme Performance Gear and Bearing Oils

Product Description
Mobil SHC 600 Series lubricants are supreme performance gear and bearing oils designed to provide outstanding service in terms of equ These scientifically engineered from base fluids with an inherently  high viscosity index and a unique, proprietary, additive system which enables these products to provide outstanding performance in extreme service applications at high and low temperatures, well beyond the capabilities of mineral oils. These products are resistant to mechanical shear, even in heavily loaded gear and high shear bearing applications, so that there is virtually no loss of viscosity.

The Mobil SHC 600 Series products have low traction coefficients, which derive from the molecular structure of the base stocks used. Low fluid friction produces lower operating temperatures and improved gear efficiency, which translates into reduced power consumption. It also results in extended parts life and allows for more economical equipment design. The base oils used in the Mobil SHC 600 Series have outstanding response to antioxidant additives superior resistance to oxidation and sludging, especially at high temperatures. The additive combination used in these oils also provides exceptional resistance to rusting and corrosion, very good antiwear, demulsibility, foam control and air release properties, as well as multimetal compatibility. The Mobil SHC 600 Series oils are also compatible with the same seal and other construction materials used in with mineral oils.

 The leading edge technology on which Mobil SHC 600 Series lubricants have always been based has made these the products of choice for operators of equipment, worldwide. While initially recognized as a high temperature problem solver, these products are now used in many industrial applications because of the range of benefits they offer.

Features and Benefits
The Mobil SHC brand of lubricants are recognized and appreciated around the world for their innovation and outstanding performance. These outstanding lubricant products. A key factor in the development of Mobil SHC 600 Series were the close contacts between our scientists and application specialists with key OEMs to ensure that our product offerings will provide exceptional performance in the continually evolving industrial equipment designs.

 Our work with equipment builders has helped confirm the results from our own laboratory tests showing the exceptional performance of the Mobil SHC 6for significant efficiency improvements in changing from mineral oil. These benefits are particularly evident in equipment which, by design, cannot avoid low overall efficiency, such as high ratio worm gears.

 To combat high thermal exposure of the oil, our product formulation scientists chose select base oils for Mobil SHC 600 Series maximize the benefits of the base oils to provide excellent oil life and deposit control and resistance to thermal/oxidative and chemical degradation. This formulation approach provides low temperature fluidity characteristics unmatched by mineral products and is a key benefit for remote, low ambient temperature applications. The Mobil SHC 600 Series oils offer the following features and potential benefits:

Features Advantages and Potential Benefits 
Superb high temperature thermal/oxidation resistance Extends equipment high temperature operating capability 
  Long oil life, reduced need and costs for oil change outs 
  Minimizes sludge and deposits for trouble-free operation and long filter life 
High Viscosity Index and absence of wax Maintains viscosity and film thickness at high temperatures 
  Exceptional low temperature performance, including start-up 
Low traction coefficient Reduces overall friction and can increase efficiency in sliding mechanisms such as gearing, with potential for reduced power consumption and lower steady-state operating temperatures. 
  Minimizes effects of micro slip in rolling contact bearings for longer rolling-element life potential 
High load carrying capability Protects equipment and extends life; minimizes unexpected downtime and extends service periods 
Balanced additive combination Provides excellent performance in terms of rust and corrosion prevention, water separability, foam control, air release performance ensuring problem-free operation in a wide range of industrial applications and reduced operating costs 

 

Applicationsbased products, admixture may detract from their performance. Consequently it is recommended that before changing a system to one of the Mobil SHC 600 Series, it should be thoroughly cleaned out and flushed to achieve the maximum performance benefits. The Mobil SHC 600 Series oils are compatible with the following seal materials: fluorocarbon, polyacrylate, polyurethane ether, some silicone, ethylenepolyethylene, polysulfide, and some nitrile rubbers. There is the potential for substantial variations in the elastomers being used today. For best results, consult your equipment supplier, seal manufacturer, or your local Mobil representative to verify compatibility.

Mobil SHC 600 Series lubricants are recommended for use in a wide variety of gear and bearing applications where high or low temperatures are encountered or where operating temperatures or bulk oil temperatures are such that conventional lubricants give unsatisfactory life, or where improved efficiency is needed. They are particularly effective in applications where the maintenance costs of component replacement, system cleaning and lubricant changes are high. Specific applications include:

?Filled for life gearboxes, especially high ratio/ low-efficiency worm gears
?Remotely located gearboxes, where oil change-out is difficult
?Low temperature applications, such as ski lifts where seasonal oil changes can be avoided
?Mixer roll bearings and roll neck bearings where high temperatures are encountered
?Plastic calendars
?Severe centrifuge applications, including marine centrifuges
?Railroad A/C Traction Drives
?Mobil SHC 625*, 627, 629 and 630 are suitable for Oil Flooded Rotary Screw Compressors compressing natural gas, field gas gathering, CO2 and other process gasses used in the natural gas industry
Specifications and Approvals

Mobil SHC 600 Series has the following builder approvals: 624 625 626 627 629 630 632 634 636 639 
ABB TURBO HZTL 90572     X               
ABB TURBO HZTL 90617     X               
CINCINNATI MACHINE P-34                 X   
CINCINNATI MACHINE P-35               X     
CINCINNATI MACHINE P-59             X       
CINCINNATI MACHINE P-74           X         
CINCINNATI MACHINE P-78                   X 
CINCINNATI MACHINE P-80     X               
FLENDER BA 7300 table A         X         X 
FLENDER BA 7300 table A and C           X X X     


 

Typical Properties

Mobil SHC 600 Series 624 625 (1) 626 627 629 630 632 634 636 639 
ISO Viscosity Grade 32 46 68 100 150 220 320 460 680 1000 
Viscosity, ASTM D 445                     
cSt @ 40o C 31.0 46.0 66.0 97.0 149 222 320 454 652 968 
cSt @ 100o C 5.8 7.7 10.3 13.7 19.0 25.7 35.0 46.5 61.2 78.5 
Viscosity Index, ASTM D 2270 133 136 144 144 144 147 154 161 163 159 
Pour Point, oC, ASTM D 97 -51 -48 -48 -45 -45 -42 -40 -40 -39 -33 
Flash Point, oC, ASTM D 92 237 242 231 228 235 240 236 234 240 235 
Specific Gravity, ASTM D 4052, 15o C/15o C 0.85 0.85 0.86 0.86 0.86 0.87 0.87 0.87 0.87 0.87 
Appearance, visual Orange Orange Orange Orange Orange Orange Orange Orange Orange Orange 
TOST, ASTM D 943, Hours to 2 NN 10,000+ 10,000+ 10,000+ 10,000+ 10,000+ 10,000+ 10,000+ 10,000+ 10,000+ 10,000+ 
RBOT, ASTM D 2272, min. 1750 1750 1750 1750 1750 1750 1750 1750 1750 1750 
Rust protection, ASTM D665, Sea Water Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass 
Water Seperability, ASTM D 1401,Min. to 37 ml water @ 54o C 20 20 20 - - - - - - - 
Water Seperability, ASTM D 1401,Min. to 37 ml water @ 82o C - - - 15 15 15 25 25 30 40 
Copper Corrosion, ASTM D130, 24 hrs @ 121o C 1B 1B 1B 1B 1B 1B 1B 1B 1B 1B 
Foam Test, ASTM D 892, Seq I,II,IIITendency / Stability, ml/ml 0/0, 20/0, 0/0 0/0, 0/0, 0/0 0/0, 0/0, 0/0 0/0, 0/0,0/0 0/0, 0/0,0/0 0/0, 0/0,0/0 0/0,0/0,0/0 0/0, 20/0,0/0 0/0,0/0,0/0 0/0, 0/0, 0/0 
FZG scuffing test, DIN 51534 (mod), A/16.6/90, Failure Stage 10 11 11 13 13 13+ 13+ 13+ 13+ 13+ 
(1) 625 is available only in the USA                     


 

供应六安美孚润滑油 美孚循环油11月较新报价

   埃克森（厦门）石油化工有限公司是一间以工业特殊润滑服务为**事业，在不断的开拓与发展中，我们在全国已形成了*、完善的销售网络、销售网点，覆盖全国多个省市,是中国区域较大较**经营****润滑油的销售服务商，是行业中一贯坚持生产**润滑油，不断把握市场需求，设计研发较加符合客户要求之产品的**。
    埃克森（厦门）石油化工有限公司主要代理壳牌(SHell)、美孚（Mobil). 加德士(CALTEX)、埃索(Esso)、嘉实多（Castrol）等工业润滑油及船舶润滑油，销售油品广泛应用于汽车、汽车制造、机械、冶金、采矿、钢铁、工程、农业、电梯、石油化工等领域，业务覆盖了中国的主要区域，在当今竞争日益激烈的市场中，始终占据行业的**是我们的目标。 我们始终秉承“质量和服务”**的宗旨，在销售润滑油产品的同时，并为客户提供完备的系统方案，务必使客户的机器得以持久如新，正常运转。我公司配备了一批具有丰富经验的业务员，直接上门为客户提供润滑油产品及相关技术的服务，能帮助客户解决有关在润滑油使用问题。与此同时，厦门埃克森自身也得到不断的发展。
      埃克森（厦门）石油化工有限公司产品品种主要有汽油机油、柴油机油、切削油、乳化油、防锈油、水性切削液、循环机油、研磨液、攻牙油、主轴油、液压油、冲压拉伸油、空压机油、针织机油、导轨油、淬火油、润滑脂、工业齿轮油、冲头油、脱模剂等。
      作为行业守合同重信用企业，国内良好能源企业，埃克森（厦门）石油化工有限公司为750多家设备制造商所推崇也顺理成章了，因为他们明白公司能跟他们倾力合作，换句话说厦门埃克森能令他们的设备性能**不凡。这些年来，厦门埃克森始终深信：同心协作才能共享成功！遍及国内数以千计的顾客是较好的证明。