供应进口杠杆浮球式疏水阀 蒸汽疏水阀原理

LIK阀门、Germany, LIK**、 进口杠杆浮球式疏水阀
杠杆浮球式疏水阀
LEVER-BALL FLOAT TRAP
德国莱克LIK杠杆浮球式疏水阀
杠杆浮球式是利用浮力原理和杠杆原理，通过液位的变化使浮球上升或下降，浮球驱动着杠杆使得阀瓣离开或接触阀座达到开启排水和关闭阻汽的作用。采用自动排空气阀，能自动排除不凝结气体，非常灵敏，工作质量高，使用寿命长。连续排水，有水即排，较小过冷度为 0℃。杠杆浮球式疏水阀采用两种结构方式 A：单阀座-杠杆浮球; B：双平衡阀座-杠杆浮球。
　　单阀座：需要克服介质压力对阀座的作用，阀座的孔径不能很大，适用于小型设备、伴热管线，蒸汽主管等排水小的场合。阀座孔设计在凝结水水位以下，自然形成水封，水、汽自然分离，达到无蒸汽泄漏，即便没有凝结水采用球型密封的杠杆使得阀瓣紧贴阀座，达到无新鲜蒸汽的泄漏。不受凝结水量波动和温度的影响。
　　双平衡阀座：该阀利用双阀孔设计，介质的压力对两个阀座作用相等，方向相反，介质压力对阀座作用相抵消，阀芯在开阀时压力相对减少，从而获得**大排量。工作时浮球随阀腔内液体位的变化而上下浮动，带动杠杆打开或关闭阀座。由于阀座孔在凝结水水位以下，形成水封，水、汽自然分离，达到无蒸汽泄漏。不受压力、温度、冷凝水流量波动的影响。
Lever-ball float trap
The lever-ball float type trap employs the buoyancy and leverage principles: to make the ball float ascend or descend by the change in the liquid level and then the ball float drives the lever to make the valve disc depart from or touch the valve seat to realize drainage and close the block vapor. The product adopts the automatic air exhaust to automatically eliminate non-condensing air. It is very precise with high operating quality and long service life. It can discharge whenever there is any water, and its minimum subcooled temperature is 0℃. The lever- ball float trap adopts two kinds of structure modes: A: Single valve seat-lever ball float; B: double balanced valve seat-lever ball float. 
Single valve seat: it needs to overcome the operation on the valve seat by the medium pressure; the hole caliber of the valve seat cannot be too large and is applicable to such low displacement condition as mini-equipment, steam tracing pipeline and steam main pipe. The hole of the valve seat is designed beneath the water level of the condensate water to form water sealing to keep water apart from vapor, so as to prevent the leakage of the vapor. Though there is no condensate water that uses ball-type sealed lever to make the valve clack tightly adhesion to the valve seat, it can prevent the fresh vapor from leakage. Further, the product is free of the affect of the fluctuation of the condensate water’s quantity and temperature.
The double balanced valve seat: this valve is designed to have two valve openings. The pressure of the medium act against the two valve seats equally in reverse direction, so the pressure on the valve seat is offset, the valve core assumes relatively low pressure when the valve is open, in this way the overlarge displacement is obtained. During the operating process, the ball float floats with the change in liquid level of the valve cavity to make the lever open or close the valve seat. The hole of the valve seat is designed beneath the water level of the condensate water to form water sealing to keep water apart from vapor, so as to prevent the leakage of the vapor. Further, the product is free of the affect caused by the fluctuation of pressure, temperature and condensate’s flow.
优点：
1、采用新型阀机构（新 SCCV 关闭方式和Z型结构），具有优良的密封性和耐久性。 
2、双平衡阀座设计，比一般的疏水阀体积小而排量大，在特大排量场合较能发挥优越性。
3、单阀座设计可以水平或垂直安装，可以满足高背压，低排量蒸汽管线。
4、内装空气自动排放阀，可防止空气气堵和蒸汽汽锁。 
5、全部部件安装在阀盖上，阀*从配管上卸下，就可维修保养，简单方便。
Merits
1. To use new-style valve mechanism (new SCCV closing mode and Z-shaped structure) to boast excellent tightness and endurance.
2. To employ double balanced valve seat design, it has smaller volume and larger displacement and can exert its advantages when needing large displacement.
3. The single valve seat model can be installed horizontally and vertically, satisfying the requirements of steam pipeline with high backpressure and low displacement.
4. The built-in automatic air exhaust can prevent air blocking and steam locking; 
5. As all components are installed on the valve cover, so they can be maintained and cleaned up simply and easily without being removed from pipe arrangement.
技术参数/Technique parameter
壳体压力等级
Shell pressure grade	负荷泄漏率
Load leakage rate	使用介质
Used medium	允许背压率
Permitted backpressure rate	节能效果
Energy saving effect	较*作压差
Maximum operating pressure differential
1.6、2.5、4.0、10MPA	≈0%	蒸汽、凝结水
Steam、Condensate water	≥90%	良好/良好
Excellence/good	10MPA
较小过冷度
Minimum subcooled temperature	排水方式
Drainage method	较高允许温度
Maximum allowable temperature	排空气装置
Air exhaust system	压力变化范围
Pressure change range
0℃	连续方式
Continue mode	420℃	自动
Automatic	适应
Adaption
主要零件材料/The materials of primary accessories
零部件名称Part and component name 	材质Material
阀体、阀盖Valve body、Valve cover	铸钢、不锈钢Cast steel、Stainless steel
浮球、杠杆Float ball、Lever	304不锈钢304 Stainless steel
双平衡阀座Dual balance valve seat	STL合金和不锈钢组合Combination of STL alloy and stainless steel  
自动排空气装置Automatic air exhaust	不锈钢、热敏元件Stainless steel、Thermo-sensitive element
过滤网Filtrating screen	不锈钢Stainless steel

德国莱克lik 阀门是一家**从事各项系统阀门生产的厂家，成立于1898年，在德国共有三个工厂，阀门总产量在德国**，产品涵盖高温高压阀门－电磁阀－疏水阀－截止阀－闸阀－球阀－止回阀－*阀－控制阀－调节阀－蝶阀－平衡阀十一大系列，总部位于德国的STUKENBROCK。
100多年来在蒸汽系统、工业流程、工艺过程、化工、造船以及楼宇自控领域提供*的技术与完善的服务，可以满足**范围内对于系统截断，*，控制及疏水功能的需求。
秉承德国一贯严谨、**的制造工艺，莱克lik 阀门一直具有**，以及高度的灵活性、*性与**性。我们可以提供多达10000种，**过100000个型号的产品，满足您个性化的阀门系统解决方案需求。
应用的专有知识使我们能给你的设备提供改进意见，在提高生产能力的同时节约成本并增加利润。
在全世界33个地区我们有1100位工程师和各种系统各个学科的*支持着我们的整体分析能力。从产品 替代到系统建造，我们与您一起工作直到您的项目圆满完成。
德国莱克lik 阀门，*的阀门，未来技术的代表！
联系我们，我们和我们当地的合作伙伴将全力以赴为您提供世界*的产品及服务。
无论你的系统有什么样的需求，莱克LIK 都有*的工程师为你提供我们的产品和服务。