供应进口自由浮球式疏水阀

进口自由浮球式疏水阀、德国LIK疏水阀尺寸、作用、原理

 
德国莱克LIK自由浮球式疏水阀 
FREE-BALL FLOAT TRAP
　自由浮球式疏水阀
　利用**研磨不锈钢空心浮球在阀腔内随着凝结水的液位变化开启或关闭阀门。该疏水阀的结构比较简单，主要由浮球和自动排空装置组成。阀腔内一的动作元件——不锈钢空心浮球，采用**研磨工艺制造，整个球面均可做密封面，工作时无集中磨损，使用寿命长 ; 阀腔内无易损件，**性高。浮球能根据水位变化而自由调节阀孔的开度，能够连续排放凝结水，过冷度≈0℃，工作**。
　　自动排空装置分为两种 :（低压PN25以内）液囊热敏元件组成和（过热蒸汽系统）双金属片组成。
 
Free-ball float trap
The drain valve is opened or closed by taking advantage of the change of liquid level of condensate water with the high-precision grinding stainless steel hollow float ball in the valve cavity. This steam trap has a simple structure, mainly consisting of float balls and automatic emptying devices. The sole action elements, namely, the stainless steel hollow float ball is manufactured by high-precision grinding process, and its entire sphere can serve as the sealing face and will not be worn intensively during the work, so it has a longer service life. In addition, there is no wearing part in the valve cavity, with a high reliability. The float ball can freely adjust the openness of the valve opening in response to the change of water level and discharge the condensate water continuously with a subcooled temperature of about 0℃ and higher efficiency.
The automatic emptying devices fall into two types : (within low pressure PN25) consisting of reservoir thermo-sensitive elements and (overheated steam system) consisting of bimetals.
优点：
1、一转动的是**研磨的不锈钢浮球，抗腐蚀。
2、结构简单，维修方便。
3、不受压力波动的影响，连续排水，噪声小。
4、装有自动排空装置，能够*排除空气，防止气堵和汽锁。
5、体积小，排量大。
6、有水就排，能够加快系统启动速度。
 
Merits
1. The sole moving component is the high-precision grinding stainless float ball, which can resist erosion.
2. Its simple structure is convenient for maintenance.
3. To drain continuously with low noise, without being affected by the fluctuation of the pressure.
4. To be equipped with automatic emptying devices and it can eliminate air quickly and prevent air blocking and steam locking.
5. Small volume and large displacement.
6. To drain whenever there is water left over so as to quicken the startup speed of the system.
 主要零件材料/The materials of primary accessories
零部件名称Part and component name	材质Material
阀体、阀盖Valve body、valve cover	铸铁、铸钢、不锈钢Cast iron、Cast steel、Stainless steel
自由浮球Free float ball	304/316不锈钢304/316 Stainless steel
阀座Valve seat	高铬不锈钢High chrome stainless steel
自动排空气装置Automatic air exhaust	不锈钢、热敏元件Stainless steel、Thermo-sensitive element
过滤网、罩Filtrating screen、Cover	不锈钢Stainless steel
不锈钢球直径/Diameter of stainless ball
材质/Material	B,JH5N	D,JH7N	E,JH9N	F,JH11N	G,JH13N
铸铁 Cast iron	68	110	150	180	200
铸钢 Cast steel	70	120	150	190	220
工作原理说明：
在设备刚启动时，低温冷凝水和空气同时进入阀腔，这时开启自动排空装置将空气排除，使低温凝结水顺利进入阀腔，阀腔内的凝结水的液位随即上升，使浮球升高，开启阀孔，将凝结水*排出 ; **的蒸汽很快进入加热设备，使设备*加热升温，当蒸汽或较高温度的凝结水进入阀腔时，自动排空装置开始膨胀，关闭自动排空气装置，疏水阀开始正常工作。这时阀腔内的浮球随凝结水液位的高低而升降，能连续的排放凝结水。由于自由浮球式疏水阀的阀座孔总处于凝结水液位以下，形成水封，水汽自然分离，工作时达到无蒸汽泄漏。该阀的较小工作压力为0.01Mpa，从0.01Mpa至较高工作压力范围内不受温度和工作压力波动的影响，能连续工作，其较小过冷度约为0℃，由于该阀能自动、连续地排除凝结水，加热设备内不会有水积聚，能使加热设备达到较佳换热效率。是生产工艺加热设备的较理想疏水阀之一。
Description of work principle
Both low-temperature condensed water and air will run into the valve cavity when the equipment is just started, consequently, automatic air discharge equipment will be open and discharge the air, enabling low-temperature condensed water coming into the valve cavity smoothly, at the moment, the level of low-temperature condensed water inside will rise swiftly, which bring about elevation of ball floating and open of valve hole, for the purpose of discharging the condensed water; the steam earlier will enter into heating equipment soon, which have equipment heating and promoting temperature in a fast manner, the automatic air discharge equipment will start inflating as the steam or rather high-temperature condensed water enter into valve cavity, otherwise, trap should operate normally as soon as the automatic air discharge equipment is closed. At the moment, the ball floating inside valve cavity will up and down along with the level of the condensed water, and with capability of continuously discharging condensed water. Due to the fact that the valve seat hole of free-ball float trap is always below the level of condensed water, ultimately formed water seal that separated water and steam in a natural way, therefore, there should be in no circumstance of leakage of steam during operation of the equipment. The valve will bear the minimum work pressure of 0.01 Mpa, in addition, it will keep operating continuously without influence of temperature and fluctuation of work pressure within the scope between 0.01Mpa and maximum work pressure. In consideration of the minimum super cooling degree of the valve is about 0℃, coupled with the fact that the valve is capable of discharging condensed water automatically and continuously, therefore, heating equipment will remain absence of accumulated water, which could have heating equipment reach optimum efficiency in heat exchange. All in all, the valve is one of the best traps for heating equipment applicable to production.

德国莱克lik 阀门是一家**从事各项系统阀门生产的厂家，成立于1898年，在德国共有三个工厂，阀门总产量在德国**，产品涵盖高温高压阀门－电磁阀－疏水阀－截止阀－闸阀－球阀－止回阀－*阀－控制阀－调节阀－蝶阀－平衡阀十一大系列，总部位于德国的STUKENBROCK。
100多年来在蒸汽系统、工业流程、工艺过程、化工、造船以及楼宇自控领域提供*的技术与完善的服务，可以满足**范围内对于系统截断，*，控制及疏水功能的需求。
秉承德国一贯严谨、**的制造工艺，莱克lik 阀门一直具有**，以及高度的灵活性、*性与**性。我们可以提供多达10000种，**过100000个型号的产品，满足您个性化的阀门系统解决方案需求。
应用的专有知识使我们能给你的设备提供改进意见，在提高生产能力的同时节约成本并增加利润。
在全世界33个地区我们有1100位工程师和各种系统各个学科的*支持着我们的整体分析能力。从产品 替代到系统建造，我们与您一起工作直到您的项目圆满完成。
德国莱克lik 阀门，*的阀门，未来技术的代表！
联系我们，我们和我们当地的合作伙伴将全力以赴为您提供世界*的产品及服务。
无论你的系统有什么样的需求，莱克LIK 都有*的工程师为你提供我们的产品和服务。