供应OBDII CAN USB V-60

OBDII CAN USB Interface V-607

Compatible with the latest cars which require a direct CAN connection for diagnostics including all Golf-5 platform cars and latest Audi A3, A6 and A8. 
Protocol timing indistinguishable from a real VAG/VAS tool. Works reliably even with "difficult" control modules such as the 1991-1994 1Z Audi TDIs and the 1993-1994 Audi 2.6L with Hella ECU. 
Built-In VAG-Saver functionality -- instantly alerts the user if either the K/K1 line or the L/K2 line is shorted to Ground or Vbatt. 
Full support for dual-K lines found in "new" (B6/8E chassis Audi A4 and 2002+ Audi A6 -- no VAS-6017 required -- no manual switches! 
Fully backwards compatible with older cars using a single K-line or 
K plus L. 

Q: What is CAN and why is it important? 
A: CAN stands for Controller Area Network. CAN is a new means of communicating with the can for diagnostics used by the latest generations of VW, Audi, SEAT, and Skoda vehicles. Unlike the older ISO9141 system which a used a single K-line for diagnostic communications, the new CAN-Bus system uses a twisted pair of wires with differential **ing. CAN is considerably faster than ISO-9141 (500 kpbs vs. 10.4 kbps). Both new hardware and new software are required in order to communicate with cars using CAN for diagnostics. 

Q: Does VAG-COM work with cars that require direct CAN access for diagnostics?
A: Yes! We have integrated CAN compatibility since the Release 404.0 version of VAG-COM, but as CAN uses different hardware, new interfaces are required in order to communicate with a CAN-based car. These are now available as well. The new HEX-COM+CAN and HEX-USB+CAN interfaces are fully compatible with the new latest cars which require a direct CAN connection.

Features: 
1.USB connector plugs into most modern laptops! 
patible with the latest cars which require a direct CAN connection for diagnostics including all Golf-5 platform cars and latest Audi A3, A6 and A8. 
3.Protocol timing indistinguishable from a real VAG/VAS tool. Works reliably even with "difficult" control modules such as the 1991-1994 1Z Audi TDIs and the 1993-1994 Audi 2.6L with Hella ECU. 
4.Built-In VAG-Saver functionality -- instantly alerts the user if either the K/K1 line or the L/K2 line is shorted to Ground or Vbatt. 
5.Full support for dual-K lines found in "new" (B6/8E chassis Audi A4 and 2002+ Audi A6 -- no VAS-6017 required -- no manual switches! 
6.Fully backwards compatible with older cars using a single K-line or K plus L. 
7.Bi-Color (red/green) status/activity LED