武汉西门子授权一级代理商CPU供应商

武汉西门子授权一级代理商CPU供应商

武汉西门子授权一级代理商CPU供应商

武汉西门子授权一级代理商CPU供应商

交换机	6GK5116-0BA00-2AC2
存储卡	6ES7954-8LF03-0AA0
模块	6ES7511-1CK01-0AB0
电源	6EP1961-3BA21
交换机	6GK5201-3JR00-2BA6
CPU模块	6ES7416-3FS06-0AB0
WINCC软件	6AV6381-2BE07-5AV0
WINCC软件	6AV6381-2BH07-5AV0
WINCC软件	6AV6381-2BF07-5AV0
WINCC软件	6AV6381-2BM07-5AV0
WINCC软件	6AV6381-2BN07-5AV0
WINCC软件	6AV6381-2BS07-5AV0
WINCC软件	6AV6381-2BQ07-5AV0
交换机	6GK5108-0BA00-2AC2
伺服轴卡	6SN1118-0DM31-0AA1
交换机	6GK5216-4BS00-2AC2
轴卡	6SN1118-0DM31-0AA2
驱动	6SN1118-0AD11-0AA0
变频器	6SE6440-2UD31-5DA1
电源	6EP3437-8SB00-0AY0
模块	6ES7516-3AN02-0AB0
基座	6ES7193-6BP20-0BA0
软件	6AV2101-0AA05-0AA5
软件	6AV6371-1DV07-5AX0
变频器	6SE6420-2AB12-5AA1
多功能表	7KM3220-0BA01-1DA0
模块	6ES7288-1ST40-0AA1
模块	6ES7288-1SR30-0AA1
模块	6ES7288-1SR60-0AA1
模块	6ES7288-1SR20-0AA1
模块	6ES7288-1ST30-0AA1
模块	6ES7288-1SR40-0AA1
模块	6ES7288-1ST20-0AA1
模块	6ES7288-1ST60-0AA1
电缆	6XV1861-4AU10
内存卡	6ES7954-8LP03-0AA0
电源	6EP4136-3AB00-0AY0

3VA1125-4ED26-0AA0	3VA1S160 R25 TM210 F/2P
3VA1132-4ED26-0AA0	3VA1S160 R32 TM210 F/2P
3VA1140-4ED26-0AA0	3VA1S160 R40 TM210 F/2P
3VA1150-4ED26-0AA0	3VA1S160 R50 TM210 F/2P
3VA1163-4ED26-0AA0	3VA1S160 R63 TM210 F/2P
3VA1180-4ED26-0AA0	3VA1S160 R80 TM210 F/2P
3VA1110-4ED26-0AA0	3VA1S160 R100 TM210 F/2P
3VA1112-4ED26-0AA0	3VA1S160 R125 TM210 F/2P
3VA1116-4ED26-0AA0	3VA1S160 R160 TM210 F/2P

SIDOOR AT40 elevator door drive

产品信息

跳转到

概述

优势

应用

设计

组态

编程

技术规范

更多信息

概述

SIDOOR AT40 elevator door drive (relay module version)

SIDOOR AT40 – SIDOOR enables the quick, easy and versatile installation, configuration and operation of a wide range of elevator door systems.

Version:

RELAY (including relay and terminal module)

CAN (including CAN and terminal module),
two controllers are available: SIDOOR AT40 CAN and CAN ADV.

Certified by CiA (CiA 301 / CiA 417).

The door system can be visualized and parameterized by the elevator controller using the "Virtual Terminal" function.

With the SIDOOR AT40 CAN ADV controller, parameters for evaluating mechanical wear can be provided at the door. These parameters can be accessed from the CAN-BUS via the elevator controller or other bus nodes and can be evaluated floor-dependently by an external evaluation logic. It includes, e.g. event counters, maximum current values in the slow end distance of the door, traversing times and energy values of the opening and closing cycles, as well as other performance values.

The evaluation can affect the maintenance cycles of the elevator system.

For dynamic door weights up to 600 kg, depending on motor variant

Automatic door weight detection

4 to 8 kg maximum counterweight (depending on motor version)

Operating temperature -20 to +50 °C

Flexible motor management (four different motor types), automatic detection

Opening width 0.3 to 5 m

Auxiliary power output 24 V DC ± 15 %; 0.4 A (short-circuit-proof)

Output stage short-circuit-proof

Supports power-optimized operation in the elevator cabin

Vandal-proof

IP54 degree of protection for 180 to 600 kg motor versions, gear unit IP40 (SIDOOR M5: entirely IP54)

The current operating states are indicated via a 7-segment display or a terminal module directly in the elevator door drive or externally. The SIDOOR SOFTWARE KIT, the SIDOOR SERVICE TOOL or the SIDOOR LINK with the SIDOOR SUPPORT App are used for this, see Additional units.

优势

1-button operation for the entire commissioning process

Optimum and stable drive characteristics

Reduced service requirements and costs

SIDOOR User Software (part of the Software Kit, not included in the scope of supply, see "Additional units") enables user-friendly operation and detailed diagnostics.

Provision of maintenance data via CANopen with the SIDOOR AT40 CAN ADV controller.

Small footprint thanks to compact design

Automated functions for enhanced safety

应用

The comfort SIDOOR AT40 elevator door drive is an intelligent door control system which enables the opening and closing of cabin and shaft doors at adjustable speeds and accelerations.

The maintenance-free, variable speed drive unit comprises a DC motor with non-self-locking gearing.

Four different motors are available:

SIDOOR M2 geared motor (24 V DC/1.8 A; motor for max. total door leaf weight of 120 kg)

SIDOOR M3 geared motor (30 V DC/4.0 A; motor for max. total door leaf weight of 180 kg)

SIDOOR M4 geared motor (30 V DC/4.0 A; motor for max. total door leaf weight of 400 kg)

SIDOOR M5 geared motor (30 V DC/7.5 A; motor for max. overall door leaf weight of 600 kg)

They must be ordered separately, see "Geared motors".

Operation of the door drive does not require a limit switch. The door width and the "OPEN"/"CLOSE" positions are determined automatically.

The current operating states are indicated by a 7‑Segment display directly in the SIDOOR AT40 elevator door drive. Furthermore, they can be displayed externally using the SIDOOR SOFTWARE KIT, the SIDOOR SERVICE TOOL or the SIDOOR LINK with the SIDOOR SUPPORT App, see "Additional units".

Power transmission is via a toothed belt, which passes over a deflector unit and can be fitted with two door clutch holders. The accessory parts are not included in the scope of supply, see "Accessories".

This enables handling of both one-sided and centrally opening doors.

设计

The SIDOOR AT40 Elevator Door Drive system consists of a number of components:

Version	Type	See
Controller
SIDOOR AT40 elevator door drive The versions with RELAY or CAN also include a terminal module.
RELAY	6FB1111-0AT10-3AT2
CAN	6FB1111-1AT10-3AT3
CAN with ADV	6FB1111-1AT11-3AT3
The following individual components must be ordered separately:
Power supplies		"Power supplies"
SIDOOR TRANSFORMER grid transformer	6FB1112-0AT20-2TR0
SIDOOR TRANSFORMER UL grid transformer	6FB1112-0AT21-2TR0
SIDOOR NT40 switch mode power supply	6FB1112-0AT20-3PS0
Additional units that enable universal implementation and maintenance of the door drive system		"Additional units"
SIDOOR SOFTWARE KIT	6FB1105-0AT01-6SW0
SIDOOR SERVICE TOOL	6FB1105-0AT01-6ST0
SIDOOR LINK (access to the command devices via the SIDOOR SUPPORT App)	6FB1305-0AT00-0AS4
DC geared motors		"Geared motors"
SIDOOR M2 geared motors (max. door weight 120 kg)
SIDOOR M2 L (pinion left)	6FB1103-0AT10-5MA0
SIDOOR M2 R (pinion right)	6FB1103-0AT11-5MA0
SIDOOR M3 geared motors (max. door weight 180 kg)
SIDOOR M3 L (pinion left)	6FB1103-0AT10-4MB0
SIDOOR M3 R (pinion right)	6FB1103-0AT11-4MB0
SIDOOR M4 geared motors (max. door weight 400 kg)
SIDOOR M4 L (pinion left)	6FB1103-0AT10-3MC0
SIDOOR M4 R (pinion right)	6FB1103-0AT11-3MC0
SIDOOR M5 geared motors (max. door weight 600 kg)
SIDOOR M5 L (pinion left)	6FB1103-0AT10-3MD0
SIDOOR M5 R (pinion right)	6FB1103-0AT11-3MD0
Accessories for the complete system see also overview diagram → "For elevators"		"Accessories"
Rubber-metal anti-vibration mounts for low-noise operation of the door drive system
for geared motors with a door weight of less than 300 kg	6FB1104-0AT02-0AD0
for geared motors with a door weight of 300 kg or more	6FB1104-0AT01-0AD0
Mounting bracket
for mounting the SIDOOR rubber-metal anti-vibration mount with a mounted geared motor	6FB1104-0AT01-0AS0
with tensioning device for mounting the deflector unit and setting the toothed belt to the required tension	6FB1104-0AT02-0AS0
Door clutch holder for attaching both ends of the toothed belt, and for connecting the respective door panel to the toothed belt	6FB1104-0AT01-0CP0
for toothed belt width of 12 mm	6FB1104-0AT01-0CP0
for toothed belt width of 14 mm	6FB1104-0AT02-0CP0
Deflector pulley for the toothed belt STS, for attaching to the door system	6FB1104-0AT04-0AS2
Deflector unit for toothed belt STS	6FB1104-0AT03-0AS0
Toothed belt STS as a connection between the door system and the end positions of the door
Toothed belt width 12 mm Length 4 m Length 45 m	6FB1104-0AT01-0AB0 6FB1104-0AT02-0AB0
Toothed belt width 14 mm Length 4 m Length 55 m	6FB1104-0AT03-0AB0 6FB1104-0AT04-0AB0

组态

During initial commissioning, please note the following:

For mechanical installation and configuration, see

"SIDOOR AT40, ATD400V" System Manual, ./cs/ww/en/view/109753387

"Manufacturer-specific CANopen objects" manual , ./cs/ww/en/view/58992020

Electrical configuration and commissioning:

Push the door into the "CLOSED" position.

Open the device cover

Plug in the motor connector

Connect NT40 switch mode power supply or grid transformer to 230 V AC mains supply

Press and hold the learn run button

Connect NT40 switch mode power supply output or grid transformer to the input of the SIDOOR AT40 elevator door drive.

The learn run starts automatically and the learn run button can be released.

On completion of the learn run, the door is in the "CLOSED" position and the 7-segment display indicates "u".

The door can now be moved via the "OPEN" and "CLOSE" buttons with the default profile.

编程

The Software Kit is available as a separate unit(see "Additional units"); it facilitates user-friendly parameter settings and oscilloscope functions via the SIDOOR User Software (part of the Software Kit).

This allows quick and easy updating of the firmware using the Siemens HCS12 Firmware Loader.

武汉西门子授权一级代理商CPU供应商