武汉西门子一级代理商变频器供应商

武汉西门子一级代理商变频器供应商

武汉西门子一级代理商变频器供应商

6BK1943-1BA00-0AA0 SIPLUS HCS4300 CIM4310 中央界面模块含 PROFIBUS 通信

湖北西门子电线电缆授权代理商，上海西门子S7-200CPU系列代理商，西门子
S7-1200CPU系列代理商，SIEMENS西门子模块授权一级代理商,西门子SIEMENS低压断路器一级供应商，西门子低压断路器
代理商，西门子S7-500系列代理商
江苏CPU模块代理商，浙江西门子S7-200,S7-300,S7-1500,S7-1200系列代理商，
长沙西门子电机代理商，湖北西门子电缆代理商，武汉西门子通讯电缆代理商，济南西门子模块代理商。西门子授权一级代理商
，深圳西门子授权总代理商

6ES73152AH140AB0	SIMATIC S7-300, CPU 315-2DP CPU 含有 MPI 接口, 集成 24 V DC 电源, 256 KB 工作存储区 2.  接口DP-MASTER/SLAVE,需要 MMC卡
6ES73152EH140AB0	SIMATIC S7-300 CPU 315-2 PN/DP, 中央处理器含有 384 KB工作存储区, 1. 接口MPI/DP 12MBIT/S, 2.接口以太网PROFINET, 带有 2个 PORT SWITCH,必须有 MMC卡
6ES73172AK140AB0	SIMATIC S7-300, CPU317-2 DP, 中央处理器带有1 MB 工作存储区, 1. 接口 MPI/DP 12MBIT/S,2. 接口 DP-MASTER/SLAVE,必须有MMC卡
6ES73172EK140AB0	SIMATIC S7-300 CPU 317-2 PN/DP, 中央处理器带有 1 MB 工作存储区, 1. 接口 MPI/DP 12MBIT/S, 2. 接口 以太网 PROFINET, 带有 2 个PORT SWITCH, 必须有 MMC卡
6ES73183EL010AB0	SIMATIC S7-300 CPU 319-3 PN/DP, 中央处理器 带有 2 MB 工作存储区, 1. 接口 MPI/DP 12MBIT/S, 2. 接口 DP-MASTER/SLAVE, 3. 接口 以太网 PROFINET, 带有 2个 PORT SWITCH,必须有 MMC卡

6ES73141AG140AB0	SIMATIC S7-300, CPU 314 CPU 带有MPI接口,集成24V DC 电源, 128 KB工作存储区,必须有MMC卡
6ES73146BH040AB0	SIMATIC S7-300, CPU 314C-2 PTP  型 CPU 带有MPI,24数字量输入/16数字量输出,4模拟量输入,2模拟量输出,1T100,4个高速计数器 (60 KHZ),集成接口 RS485,集成24V DC 电源,192 KB工作存储区,前连接器(2 X 40针)需要MMC卡
6ES73146CH040AB0	SIMATIC S7-300, CPU 314C-2 DP紧凑型CPU带有MPI,24 数字量输入/16 数字量输出, 4模拟量输入, 2模拟量输出, 1 PT100,4个高速计数器(60 KHZ),集成 DP 接口,集成24V DC 电源,192 KB工作存储区,前连接器 (2 X 40针) 需要MMC卡

6ES73121AE140AB0	SIMATIC S7-300,CPU 312 带有MPI接口,集成24 V DC 电源,32 K 工作存储区,必须有MMC卡
6ES73125BF040AB0	SIMATIC S7-300, CPU 312C, 紧凑型CPU带有MPI,10数字量输入/6数字量输出,2个高速计数器（10KHZ）,集成24 V DC 电源,64 KB工作存储区,前连接器（1X 40 针）需要MMC卡
6ES73135BG040AB0	SIMATIC S7-300, CPU 313C,紧凑型CPU带有MPI,24数字量输入/16数字量输出,4模拟量输入, 2模拟量输出 1 PT100,3个高速计数器（30 KHZ）,集成24 V DC 电源,128 KB工作存储区,前连接器（1X 40 针）需要MMC卡
6ES73135BG044AB1	SIMATIC S7-300 CPU 组包含：S7-300 CPU 313C(6ES7313-5BG04-0AB0),2X前连接器(6ES7392-1AM00-0AA0)带有螺钉触点,40针
6ES73135BG044AB2	SIMATIC S7-300 CPU 组包含：S7-300 CPU 313C(6ES7313-5BG04-0AB0),2X前连接器(6ES7392-1AM00-0AA0)带有弹簧触点,40针

Central Interface Module (CIM)

订货数据

 

附件

 

产品信息

 

组态工具

跳转到

概述

设计

功能

技术规范

概述

The Central Interface Module (CIM) is the intelligent processor module of the SIPLUS HCS4300 heating control system.

设计

Module (encapsulated) in a metal enclosure.

3 LEDs for normal operation (green), heating on (yellow) and fault (red).

There are 2 versions:

With PROFINET interface (up to 100 Mbaud) with double switch

With PROFIBUS interface (up to 12 Mbaud)

Differential serial bus interface for the Power Output Modules (POMs).

Power supply for the Power Output Modules and the fan modules of the heating control system.

Secured with 4 screws, on the left side of the first POM.

Connection of up to 8 POMs possible per CIM.

Slot for a PM4000 I/O module.

Optional: I/O module for temperature measurement, DI/DQ or current and voltage measurement (line voltage compensation).

The configuration can be expanded by up to 8 additional POMs with the use of an EM4315 expansion module. To do so, the EM4315 only needs to be supplied with 24 V DC.

A maximum of 24 POMs can be operated on one CIM (with 2 EM4315).

功能

Communication

PROFINET/PROFIBUS

Import of the parameter settings from the higher-level PLC

Transfer of diagnostic information to the higher-level PLC

Serial bus (internal)

Control and monitoring of max. 72 power output channels or 216 power output channels with expansion module

Performance features

Calculation of manipulated variables of power output channels

Setpoints can be adjusted from 0% to 100% in increments of 1%

Simple adaptation to any production process through the selection of operating modes

Diagnostics functions

Evaluation of diagnostics information from connected power output modules

Phase-sequence detection indicating whether phases L1, L2, and L3 are correctly connected

Automatic detection of the line frequency

技术规范

Article number		6BK1943-1AA00-0AA0	6BK1943-1BA00-0AA0	6BK1943-1AA50-0AA0
		HCS CIM4310 PROFINET	HCS CIM4310 PROFIBUS	HCS EM4315 Extension Module
General information
Product type designation		CIM4310 PROFINET	CIM4310 PROFIBUS	EM4315
Installation type/mounting
Mounting type		Screw mounting to POM
Mounting position		vertical
Type of ventilation		Forced ventilation
Supply voltage
Type of supply voltage		DC
Rated value (DC)		24 V
relative symmetrical tolerance of the supply voltage		20 %
Connection method
● Design of electrical connection for supply voltage		plug, 2x 2-pole with spring-type terminal, push-in
— Connectable conductor cross-sections, solid		1x (0.2 ... 2.5 mm²)
— Connectable conductor cross-sections, finely stranded with wire end processing		1x (0.2 ... 2.5 mm²)
— Connectable conductor cross-sections for AWG cables		1x (26 ... 12)
Power
Active power input		3 W		1 W
Hardware configuration
Type of power output connectable		POM4320
Slots
● Number of slots		1		0
Interfaces
Interfaces/bus type		PROFINET IO	PROFIBUS DP	system interface
Transmission rate, max.		100 Mbit/s	12 Mbit/s
PROFIBUS DP
● Design of electrical connection			9-pin sub D socket
Supports protocol for PROFINET IO
● Design of electrical connection of PROFINET interface		2x RJ45
Protocols
Supports protocol for PROFINET IO		Yes	No
PROFIBUS DP		No	Yes	No
EtherNet/IP		No
Interrupts/diagnostics/status information
Number of status displays		3		1
LED status display		LED green = ready, LED yellow = heating on/off, LED red = error display		LED green = ready
Isolation
Overvoltage category		III
Degree of pollution		2
EMC
EMC interference emission		Limit value in accordance with IEC 61000-6-4:2007 + A1:2011
Electrostatic discharge acc. to IEC 61000-4-2		4 kV contact discharge / 8 kV air discharge
Field-related interference acc. to IEC 61000-4-3		10 V/m (80 ... 1 000 MHz), 3 V/m (1.4 ... 2.0 GHz), 1 V/m (2.0 ... 2.7 GHz)
Conducted interference due to burst acc. to IEC 61000-4-4		2 kV power supply lines, 2 kV PROFINET cables	2 kV power supply lines / 2 kV PROFIBUS cables	2 kV power supply lines
Conducted interference due to surge acc. to IEC 61000-4-5		DC supply lines: 0.5 kV symmetric and unsymmetric PROFINET cables: 1 kV unsymmetric	DC supply lines: 0.5 kV symmetrical and asymmetrical, PROFIBUS lines: 1 kV asymmetrical	On DC supply lines: 0.5 kV symmetrical and asymmetrical
Conducted interference due to high-frequency radiation acc. to IEC 61000-4-6		10 V (0.15 ... 80 MHz)
Degree and class of protection
IP degree of protection		IP20
Standards, approvals, certificates
CE mark		Yes
UL approval		Yes
RCM (formerly C-TICK)		Yes
KC approval		Yes
EAC (formerly Gost-R)		Yes
China RoHS compliance		Yes
reference designation according to IEC 81346-2 (2009)		K
Ambient conditions
Ambient temperature during operation
● min.		0 °C
● max.		55 °C
Ambient temperature during storage/transportation
● Storage, min.		-25 °C
● Storage, max.		70 °C
● Transportation, min.		-25 °C
● Transportation, max.		70 °C
Air pressure acc. to IEC 60068-2-13
● Operation, min.		860 hPa
● Operation, max.		1 080 hPa
● Storage, min.		660 hPa
● Storage, max.		1 080 hPa
Altitude during operation relating to sea level
● Installation altitude above sea level, max.		2 000 m
Relative humidity
● Operation at 25 ℃, max.		95 %
● Operation at 50 ℃, max.		50 %; 95 % at 25 °C, decreasing linearly to 50 % at 50 °C
Vibrations
● Vibration resistance during operation acc. to IEC 60068-2-6		10 ... 58 Hz / 0.075 mm, 58 ... 150 Hz / 1 g
● Vibration resistance during storage acc. to IEC 60068-2-6		5 ... 8.5 Hz / 3.5 mm, 8.5 ... 500 Hz / 1 g
Shock testing
● Shock resistance during operation acc. to IEC 60068-2-27		15 g / 11 ms / 3 shocks/axis
● Shock resistance during storage acc. to IEC 60068-2-29		25 g / 6 ms / 1 000 shocks/axis
Dimensions
Width		56 mm
Height		285 mm
Depth		136 mm		122 mm

武汉西门子一级代理商变频器供应商